User's Manual
1. Soundbar :1unit
2. Audio Cable :1unit
3. User Manual :1unit
4. Remote Control :1unit
PACKAGE CONTENTS
UNIT OPERATION
SPECIFICATIONS
DESCRIPTION OF THE REMOTE CONTROL
1.Power-on：Insert the adapter (DC13V/1.8A) that comes with the machine, the machine
enters standby, and the LED indicator flashes red light.
2.AUX mode: Press the power button or the remote control INPUT button to enter AUX mode,
and the LED indicates red light, and then connect an external audio source to play music
through the 3.5mm audio cable that comes with this machine. In AUX mode, the
volume/treble and bass, and other functions are available to be adjusted.
Output Power: 40W
Driver Unit :2.25’’*2
S/N:.>=80dB
Distortion≤1%
Power supply:DC13V/1.8A
Dear Customer,
Thanks your trust and congratulations on getting one of the best sounbar on the market!
Please refer to the notes below and follow the instructions to ensure that you use the sounbar
correctly and have a good experience with this product.
If you got any question on using this soundbar or other issue, please send us a seller
message in our Amazon store. You can also contact our support team: cici@miisso.com , We
will provide a fast solution within 24 hours. Problems are often due to some steps missing or
just changing one setting to solve.
Please don’t worry since it has 12-month warranty and lifetime service, feel free to tell us if you
have any question.
Turns on standby mode.
Navigates between AUX/BT/USB mode.
Increase/decrease the volume.
Skip to the previous track.
Skip to the next track.
Play/Pause the BT/USB mode.
Increase/decrease treble.
Increase/decrease bass.
Choose audio output sound field effect.
Mute the sound.
1. POWER :
2. INPUT:
3.
VOLUME {-,+}
:
4. :
5. :
6. :
7. TRE {-,+} :
8. BASS {-,+} :
9. EQ :
10.
:
1
2
3
4
6
7
8
9
10
5
3
7
8
3. BT mode: After the machine enters standby mode, short press the power button on the panel
or the remote control power button to start the machine, and the machine enters the default
BT mode , while the LED indicator flashes blue light, then search the BT “S28R Lite” to
connect.
4. USB mode: Press the power button or the remote control INPUT button to enter USB mode,
and the LED indicates red light and blue light at the same time, connect the corresponding
audio source or insert a USB flash disk to play music, and the USB mode has priority
function, that is, regardless of In what mode, when the USB flash disk is inserted, the USB
flash disk will play first.
Read these instructions before using the product.
Read all warnings carefully.
Follow all instructions carefully.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Do not install the speaker system near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power card from being waled on or pinched particularly at plug points and the
point where they exit from the unit.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the unit. When a cart is used, be cautious while moving the car-unit combination to
avoid injury from tip-over.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions,may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which there receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part15 of
the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed
and operated with minimum distance between 20cm the radiator your body: Use only the supplied
antenna.
.
.
.
.
.
.
.
.
.
.
SAFETY INSTRUCTIONS
4
1.Make sure the power supply is proper and never handle the power cord or its plug with
wet hands when plugging into, or unplugging from an outlet.
1.Ensure that the main power switch is in the “OFF” position before connecting the AC
power cord to the power supply to avoid damage to the unit.
3.A damaged power cord can easily cause an electric shock or fire hazard; Never use a
power cord after it has been damaged.
1) Open the battery case.
2) Insert two batteries without the polarity reversed.
3) Close the battery case.
4) Keep within 5 meter range, 30 degree angle while aiming at the unit.
Remove the battery when the unit is not being used for a long period of time.
AC POWER
IMPORTANT NOTES
BATTERY INSTALLATION
Precau�onary note:
EXPLANATION OF THE SYMBOLS ON THE DEVICE
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER(OR BACK)NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
1.AUX IN
2.USB, Support USB flash disk, format: MP3/WMA
3.DC power input, power specification: 13V/1.8A
1. : Standby/Power On/INPUT selection key: Short press this key to power on/INPUT
selection (INPUT selection sequence: AUX→BT→USB), long press to standby.。
2. : Play/Pause/Mute key: In BT/USB mode, press this key to play music, press again to
pause playback. In AUX mode, press this key to mute, press again to cancel mute.
3. : Volume down key: In USB/BT mode, short press this key to select the previous song,
long press it to decrease the volume. In AUX mode, long press/short press this button will
decrease the volume。
4. : Volume up key: In USB/BT mode, short press this button to select the next song, long
press to increase the volume. In AUX mode, long press/short press this button will increase
the volume.
AUX IN USB DC IN
1 2 3
/
1 2
4
3
/
5
Model: S28R
User Manual
SOUNDBAR
Size:L130*W95mm 80g书纸，黑白 P/N:84- “ ”洋红色为折线，不印刷。” “为参考线”