http://www.smartelock.
1. Characteristics 1. SMARTPHONE App Access through Smartphone Application by BLE communication with ER200. 2. RFID READER Access through RFID CARD. 3. RS232C Data communication between RS232C and accessories.
2.
3-1. Setting ER200 Reader SMARTeLock How to set Reader Embedded type ③ ④ ⑤ 1. Select a Device Select a Hotel 2. Select the Setting 3.
3-2. How to use ER200 SMARTeLock How to use Reader Embedded type ① 1. Check if the cards (guest card / maintenance card / maid card) that were issued from the client program are working on the reader. ② 2. Check if the smartphone APP works on the reader by BLE communication.
3-2. How to use ER200 SMARTeLock How to use Reader Embedded type 1. LED and sound when using available RF card Item ① ② Sound LED Authentication verified Tick Green Invalid (Expired) Tick Tick Tick Red Not available Ti~~~~ck Red ③ G R R 2. LED and sound when using expired RF card 3.
4. ER200 Specification Item CPU SMARTeLock RFID / Reader 32-bit ARM® Cortex™-M4 User Credential RFID card / QR code / App (BLE) RFID Protocol ISO 14443A / MIFARE / DESFIRE Security FW Update LED Wire communication Material (Color) Size Certificate Power AES 128 BLE RGB indicator RS232C Acrylic (Black, White, Transparent, Translucent, etc) 15 X 7 cm KC DC12V 1.
5. Regulatory Statement SMARTeLock The revised User Manual does not contain the FCC required warning statements. a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b. Rule Part 15.
