USER GUIDE RF&KEYPAD INTEGRATED SLIM LOCKER LOCK (Model : SL300 / SL300E) Passtech Co., Ltd. Copyright ⓒ 2021 Passtech Co., Ltd. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of Passtech Inc.
SL300 / SL300E Lock User Guide Passtech Co., Ltd. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. Passtech provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products.
SL300 / SL300E Lock User Guide Table of Contents 1. Understanding SL300 / SL300E LOCKER LOCK .................. 4 2. 1.1 What is SL300 / SL300E LOCKER LOCK? ........................................ 4 1.2 Features by model.............................................................................. 4 1.3 Operating cards .................................................................................. 5 Types of Lock Operating Scenario ........................................ 6 2.
SL300 / SL300E Lock User Guide 1. Understanding SL300 / SL300E LOCKER LOCK 1.1 What is SL300 / SL300E LOCKER LOCK? SL300 / SL300E LOCKER LOCK locker locks are the locker lock operated by either13,56 - MHz RF Card Key. - SL300 / SL300E LOCKER LOCK can work as both offline (standalone) or online mode. - To set SL300 / SL300E LOCKER LOCK as online system, additional peripherals such as Access point, Server and client software are necessary.
SL300 / SL300E Lock User Guide 1.3 Operating cards Card Name Key card • Then, the locks will accept only the RFID cards which have the same security key value. • Lock will be programmed with various options at scanning. card • Setup card can be set from Lock Installation Software (LIS). card Master II card Owner card Maintenance card Audit trail card type • Security Key value to be loaded to locks at scanning. Setup Master I Card Description • All locks will be open at scanning.
SL300 / SL300E Lock User Guide 2. Types of Lock Operating Scenario SL300 / SL300E LOCKER LOCK locker locks are designed to work for the various operation requirements by simple set up process. Following operation modes can be programmed before or after lock installation. 2.1 Free Selection (Shared Use) - User card is not assigned to any certain lock but User is free to select any empty locker to occupy. - Programmable to make LED lamp blinked to represent locker is in use.
SL300 / SL300E Lock User Guide 3. Lock Operation 3.1 RF tag uses ① SL300 / SL300E LOCKER LOCK can be set with two different credential acceptance modes. ② RF tag mode accepts RF tag ③ These modes can be set from Maintenance card (or setup card) 3.2 Assigned Mode 3.2.1 Open & Close by RF card key ① RF card key can be used anytime. Touch the lock + Put User Card on the Lock. 3.2.
SL300 / SL300E Lock User Guide (3) Registration via Mobile App Run the mobile App. If you are not registered yet, the registration page will show up right after you start the mobile application. Otherwise, go to Menu and press the “Registration” button for a new registration. To register via the Mobile App, follow the instructions that will appear on your mobile device screen. The instructions are like following: - Scan your user card on the lock.
SL300 / SL300E Lock User Guide (4) Multi-user and multi-locker There are four operation scenarios for BLE mobile access locking solution. An unlimited number of mobile devices can be assigned to one locker by syncing up with a card, but one mobile device can have only one card assigned, whereas one phone can operate up to 5 locker locks at the same time if its RF card have 5 locks assigned. (5) Access Log To check the history of the mobile access key, visit the “Access Log” in the Menu bar. 3.
SL300 / SL300E Lock User Guide ② After running the App, choose ‘Free mode’ on the setting tab. ③ Then, you can freely choose any available lock to operate. To access your mobile device, please set your lock for CSN Free mode and change the usage mode to Free mode from the Passtech APP from your mobile device. 3.4 Open in Emergency ① In case User loses user card, Operator can open the lock by Master Card I. ② Master card can be set by Set up Card.
SL300 / SL300E Lock User Guide CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Version 1.0 11 http://www.esmartlock.
SL300 / SL300E Lock User Guide 4. Card Operation 4.1 Owner Card The role of the Owner card is to delete the Master card registration. Therefore, Owner card will be used to delete current master card registration in the lock, and make the lock to be ready to register new Master Card. It is simple to delete the Master card registration and to register new master card in the lock : ① Put the Owner card to the lock until lock sounds beep (one time) and red lamp lights.
SL300 / SL300E Lock User Guide Put the Maintenance card to the locks, then, new Master cards will be registered to ③ the lock, and lost master card will be blocked. (2) Using Owner Card ① Delete the old master card registrations in the lock (refer to the 4.1) with Owner Card. ② Put new master cards to each lock so as to register new master cards. Then, old master card you lost will not be used.
SL300 / SL300E Lock User Guide 4.3.2 Assigned Mode (Permanent Use) The initial status of the lock in Assigned Mode is closed status (latch out) ① Touch to wake up the lock. ② Put the User Card to the front body of the assigned lock. ③ Lock checks the card, if the key of the user card is correct, Lock will emit green LED lights and beep sound once. Then, lock will be opened, and closed again in 5 seconds. ④ To close the locker, just close the door. Lock will remain the closed status. 4.3.
SL300 / SL300E Lock User Guide 4.5 Audit Trail card ① Put Audit Trail Card to the lock. ② The latest event data (up to 150 events) will be downloaded from lock to the Card. Wait until melody is on. ③ Read the Card at LOS program, and 150 event data will be saved to the PC. 4.6 Lock Info card ① Put Lock info Card to the lock. ② Various lock information data will be downloaded from locks to the Card. One card can collect up to 40 locks. ③ Read the Card at LOS program, and all data will be saved to the PC.
SL300 / SL300E Lock User Guide 5. Indication Instruction 1) Open/Close:GREEN LED on for 0.2 second, one beep sound for 0.2 second. 2) Successful programming:Melody. 3) Indicate for mistake:RED LED flashes 3 times, 3 beep sounds 4) Low voltage:RED LED blinks 5 times, and beep sounds 5 times. 6. Specification Item Spec Material Polycarbonate Communication 2.
SL300 / SL300E Lock User Guide ANNEX A Beep & LED Table Beep LED Description 1 x short beep 1 x Green(2sec) OK 2 x short beep 1 x Red(2sec) Operation Error 3 x short beep 1 x Red & Green in Time over turn(2sec) Do-Re-Mi Melody 1 x Red & Green in Successful Set up / mode turn(2sec) change / Time setting 5 x short beep 5 x Red & Green Low battery Do-Re-Mi Melody 2 x Red & Green Successful connection between front and back bodies.
SL300 / SL300E Lock User Guide 1) Master card registration should be followed Master card registration in the lock was failed. after deleting old Master card in the lock by Owner card. 2) Put Master card on the lock before waiting time is out after Owner card. Cannot open the lock with Master Master card is not registered in the lock. card Please Register the Master card in the lock. 1. Check the Setting of User card by LOS.
SL300 / SL300E Lock User Guide 7 Regulatory Statement FCC Part 15.105 statement (Class B) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.