User's Manual

Version 1.0.0 - 7 -
4. Lock Setting and Emergency open
4.1 Lock Setting
1) Press “Zephyr” button, and put the Key card and the programmed Set up
card to the front lock body in turn.
Note : If the lock was already set to any operation mode, and you intend
to change this operation mode, please erase any User information
stored in the memory of the lock by using Clear Card.
2) The GREEN LED indicator will illuminate followed by melody.
3) The lock will stay as it was (i.e, there is no latch movement). Lock will retain
code on both Free selection and Fixed Selection mode.
4.2 Emergency Open
1) In case User forget his(her) password, Operator can open the lock by Master
Card.
2) Once Master card is used to open the lock, the lock reverts to default
position
(i.e. lock will stay open for Free Selection, and default code of 1234 for Fixed
Selection mode.).