Datasheet

PatchSee
Technical Data Sheet
Construction
Number of pairs
4
Type
U-FTP (STP)
Conductor
Stranded bare copper wire, 7/0.16 +/- 0.005 mm
Gage
26 AWG
Insulation
Foam Skin Polyethylene
Individual pair screen
Al-laminated metal pair foil
Pair Screen
n a
Optical wave guide
2 POF 0.5 mm
Drain
Stranded drain wire tinned copper, 26 AWG
Jacket
LSOH Black with white printing (LSOH : IEEC 60332-3 Cat C, Low Smoke
: IEEC 61189-2C12, Halogen Free : IPC4101-A)
Overall diameter
5.9 +/- 0.2 mm
Plug housing
UL 1863 Polycarbonate , individual wire guide and management bar
Contacts
Moved contacts
Contact Plating
50 µ inches gold minimum (1.2 µm)
Shielding
Tin-plated
Mechanical Properties of the cable
Fire Propagation Test Temperature range
During operation
Fire load Bending radius
UL 1581 VW 1 Flame
test
-20°C up to +75°C 372 MJ/km >25 mm without load
Electrical Properties of the cable (at 20°C +/- 5°C)
Conductor
resistance
Insulation
resistance
Mutual
Capacitance
Impedance
1-100MHz
Impedance
100
-
250MHz
Propagation
delay
Test
voltage
< 140?/km > 150
M?/km
56nF/km 100 +/- 15 ? 100 +/- 15 ? < 45 ns/100m 2 500 V -
3 seconds
- Light identification by plastic optical fiber,
- PCI (Patchsee Connector Insert : Owner PatchSee)
o designed to improve NEXT and RL for 10 Gigabits
applications,
o designed for high density panels and active components (same size as the plug
in width and height)
- W
arranty 25 years for Channel Cat 6A link on Cat 6A Permanent Link certified and ready
f
or 10 Gigabits applications
- Individual tested: each Patch Cord is individual tested (Return Loss, Attenuation,
NEXT, etc…) and all the reports tests are archiving on computer database.
- Many lengths 2 feet (0.6 m) up to 20 feet (4.9 m) for patch panel and terminal link,
- Color cable: Black with white marking,
- Color boot: Grey with white marking,
- Movable color clip, 16 colors available,
- Available in cross patch cord,
- Marking on the boot: length and P/N,
- Unique serial number marking on the cable
PatchSee Concept and main characteristics