English Getting Started with Labtec Wireless Desktop Deutsch ® 2-6 7-11 Français 12-16 ™ Italiano 17-21 Español 22-26 Português 27-31 Nederlands 32-36 Svenska 37-41 Dansk 42-46 Norsk 47-51 Suomi 52-56 Ελληνικά 57-61 По-русски 62-66 Magyar 67-71 Česká verze 72-76 Po polsku 77-81
English Important Ergonomic Information Long periods of repetitive motions using an improperly set-up workspace, incorrect body position, and poor work habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. If you feel pain, numbness, weakness, swelling, burning, cramping, or stiffness in these areas, see a qualified health professional. Introduction to the Labtec® Wireless Desktop The Labtec® Wireless Desktop is loaded full of features.
Connect Devices If you find that you are having problems with your mouse or keyboard (erratic or no movement), simply pressing the "connect" key on the receiver then press the "reset" key on th bottom of the mouse or Keyboard. Low Battery Lights If the light in the front of the mouse or the top left of the keyboard does not go on when you move the mouse or press a key, the voltage of the battery is low. Please replace your batteries. Expected battery life is 2 to 6 months depending on usage.
English 3rd Button Functionality These controls support the functions of the middle wheel button. The available controls are outlined here. See the Help button for more details. • Universal Scroll - Allows you to change the scrolling style and speeds of the mouse wheel. • Zooming - Magnify a section of your screen for easier viewing of small text and graphics. • Auto Scroll - Program the screen to scroll by the direction of mouse movement.
Installation Configuration and Troubleshooting If your Labtec® Wireless Desktop™ does not function properly, please review the following steps for troubleshooting: • Insure that the PS/2 connectors of the Wireless Receiver are properly inserted into the mouse and keyboard PS/2 sockets of your computer. • Re-orient the receiver closer to the mouse and keyboard. • Check the power level of the batteries. • Keep the distance between the receiver and the devices within 1.5 meters (2 meters max.).
E n g lis h Federal Communications Commission This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference , and (2) this device must accept any interference received, including interference that may cause undesired operation. ! Note This equipment has been tested and found to comply with the limits for a Class B digital devic , pursuant to Part 15 of the FCC Rules .
