User Manual

English

Maintenance of your Wireless Desktop

™

• If the mouse does not move smoothly, you should clean the roller ball and the roller bars

in the mouse.

• Open the cover of the ball by turning it counter-clockwise, remove the ball and wipe it with

a clean cloth.

• There are three sets of roller bars. Remove the dust or any other miscellaneous matter by using

a cotton swab.You can dip the cotton swab in alcohol to help remove deposits if necessary.

• You may clean the surface of the Mouse and Keyboard with a soft damp cloth.

• Do not use any harsh or abrasive cleaners

• Before using any chemical cleaners, please test the results on the bottom of the device.

Installation Configuration and Troubleshooting

If your Labtec

Wireless Desktop

™

does not function properly, please review the following steps for

troubleshooting:

• Insure that the PS/2 connectors of the Wireless Receiver are properly inserted into the mouse

and keyboard PS/2 sockets of your computer.

• Re-orient the receiver closer to the mouse and keyboard.

• Check the power level of the batteries.

• Keep the distance between the receiver and the devices within 1.5 meters (2 meters max.).

Some objects may affect the operating distance or completely block the Cordless signal.

• Metallic surfaces will shorten transmission distances

• Try to re-connect (see connect devices).