Installation Guide

Mark the spot
1. Remove the mounting plate
from the box and select your
installation location.
2. Hold the mounting plate so
that the brackets stick out
towards you.
Important: For maximum
impact, choose a wall next to
your handwashing station.
3. Use your tape measure to
confirm that the distance
between the floor and the top of
the bracket is less than 50 in.
Important: To avoid light
interference place the Hand
Scanner at least 12 in. from any
reflective surfaces (stainless
steel, glossy tile, mirror etc.).
Reach PathSpot Support at [e-mail] or call [phone]
4