Owner manual

ManualsBrandsPathway ManualsComputer Hardware# 8601, 8603, 8605

8601

8602

8603

8600

- 2 x AMX inputs / DMX output

- 2 x DMX inputs / 2 x AMX outputs

- 2 x DMX inputs / DMX output

- 19" rack mount bracket kit

- Optional 115/230VAC power supply,

installed

DMX combines, merges and converts

two separate data sources into a single output.

Alternatively, it can be used as an automatic soft-

switch between two data sources.

Features:

Manager

Combines two inputs on a highest takes

precedence basis

Automatically switches from one input to

another upon loss of signal

High performance processor

Output address selection

Status Quo" feature maintains last output

level when input signal stops

Input/output diagnostic functions

Direct pass-thru connectors

Sturdy all metal construction

Optional 19" rack mount kit

DMX512/AMX192 models

DMX ManualManagerDMX ManualManager

SPECIFICATIONS

MODEL DESCRIPTION

Dimensions: 8"x1.75"x6.5"(203mmx44mmx165mm)

Shipping weight : 3 lbs (1.3Kg)

PowerSupply:

USA&Canada:9VDCexternaladapterincluded

Export:9VDC 200mAexternaladapterrequired

OptionalACversion:115/230VAC50/60Hz

X 100 X 10

madein Canada

address select mode select

power

data A

data B

54321678

DMXManager

support@gray-interfaces.com

visit us at

www.gray-interfaces.com

GRAY

Gray Interfaces, 480C - 36 Avenue S.E.,

Calgary, AB T2G 1W4 Canada

tel (403) 243-8110 fax (403) 287-1281

Printed in Canada

Summary of content (4 pages)

PAGE 1
DMXManager Manual address select 123 123 90 90 DMXManager combines, merges and converts two separate data sources into a single output. Alternatively, it can be used as an automatic softswitch between two data sources.
PAGE 2
ABOUT THE INTERFACE SETUP INSTRUCTIONS T he Gray Interfaces Protocol Manager is designed to permit easy, and trouble free conversion between standard USITT DMX512 and AMX192 the unit's output will be determined by the highest individual channel levels on each line. lighting control signals. The unit's main feature is its ability to manage two separate lines of input data.
PAGE 3
ABOUT THE INTERFACE DMXManger address select 123 90 90 123 mode select Three LEDs are used to indicate, from left to right, power supply / 8 8 8 90 123 45 67 45 67 67 45 po w da er ta da A ta B LED INDICATORS 1 2 3 4 5 6 7 8 processor run status, data A receive detect, and data B receive detect. X1 X 100 X 10 made in Canada In test mode the receive detect LEDs will flash if the input signal is not as selected by the I/O mode switches or if the signal is unrecognizable.
PAGE 4
DIP SWITCH SETTINGS & CONNECTOR PINOUTS DMX - 512 1 2 3 4 5 - COMMON - DATA- DATA+ - NC - NC COMMON CLOCK+ ANALOG CLOCK- DMX input - DMX output ON ON 1 1 5 DMX input - AMX output OFF ON 4 3 2 2 4 3 AMX input - AMX output ON OFF AMX input - DMX output OFF OFF 4 1 1 4 3 2 2 3 IN (F) 1 3 3 STATUS QUO enabled ON OFF Output data fails 2 seconds after loss of input data OUT (M) 1 S1-5 STATUS QUO disabled PUSH 2 STATUS QUO OPTION Output data remains active at last valid