Warranty Information
Fire Pit Safety Instructions
Important Information About Your Fire Pit
Patina Finishing Process
Patina Products re pits have been manufactured under the highest standards of quality and are unconditionally
guaranteed to be free from defects in material and workmanship. However, logos and images are cut into the side
of our re pits using a CNC plasma cutter and the nished product is 100% hand welded and hand nished. As such,
slight variations in patina nish as well as resolution and detail of artwork, and/or custom logos or custom designed
artwork are normal, and may vary due to the nature of our manufacturing process. Variations include but are not
limited to patina (rust) nish, logo, image or text placement, size of logo, image or text, quality (thickness, resolution)
of line art, cut and weld penetration, and uniformity.
Patina Products re pits are not painted. Instead we apply a natural rust patina nish to the re pits that will age
beautifully over time. The rust patina nish may have a yellow, brown, or even green appearance at rst, and may
be aky, dusty, or gritty to the touch. The nish may also rub o on your hands or clothing if touched. It may also
leave rust marks on hard surface patios and decks and we therefore recommend placing a non-ammable pad,
cement pavers, bricks, or a large piece of agstone under the re pit for added protection.
Please read all SAFETY information before using re pit. Failure to heed safety instructions may cause serious
bodily injury or death, or a re resulting in damage to property.
Fire pits are designed for outdoor use only.
Fire pits are hot while in use. Never attempt to touch or move re pit while in use.
Do not use gasoline or other highly volatile uid to ignite wood or charcoals.
Do not place re pit on grass or wood deck while in use. Heat may be conducted through bottom of re pit and
scorch grass or wood, resulting in re.
Do not remove burning wood, ash, or hot coals from re pit.
Do not use in windy conditions.
Do not burn paper or any other lightweight material that may oat away and begin a re.
Barbeque mitts or poker should be used when removing or replacing screen over a hot re pit.
Charcoal lighter uid may be used to start re or coals. Cap uid container before starting re, and place a safe
distance away from re pit.
Never add charcoal lighter uid once re has been lit.
Use safety screen at all times when re pit is lit. Safety screen is designed to minimize oating debris, which may
start a re causing damage to person or property.
After washing re pit is dipped into our secret sauce.
Fire pit after 5 minutes in dipping tank.
Fire pit in oxidation/patina phase - 1 hour later.
Fire pit with nal nish.
Cal re pit ready for a burn.
Color of the re pit after a 1 hour burn.
www.patinaproducts.com