Instructions / Assembly
12
Assembly (continued)
□
Remove the pre-assembled screws from the post
support (F) and attach post (D) to the post support (F)
using those 4 screws.
F
10
□
Unscrew the four screws that are preassembled on the
head assembly (C). Place the head assembly (C) into the top
of the post (D) by inserting the regulator (H) into the post
(D). Tightly fasten the previously removed screws back into
the head assembly (C) through the slots at the top of the
post (D).
Attach the head assembly to the post










