Instructions / Assembly

17
FLAME CHARACTERISTIC
□
□
□
□ The heater should not be operated again until the unit is serviced or repaired.
SCREW AND BOLT CONNECTIONS
□ All screws and bolts, etc, should be checked and tightened on a regular basis.
STORAGE
□ Do not leave the patio heater exposed to outside weather conditions or stored in damp moist conditions.
□
damaged or deformed, as this will affect performance.
□
□
□ If the heater is to be stored indoors, the gas bottle must be disconnected and left outside in a dry, well-ventilated area, away from
any sources of heat or ignition.
□ Do not let children tamper with the bottle.
SERVICE
□ We recommend that servicing of this appliance should be performed either after every 100 hours of use or annually, which ever is
achieved soonest.
□ If your heater needs maintenance or is not working properly, please contact your local authorized agent for service.
□ It is a necessity to contact an authorized source for replacement of parts and/or servicing.
□
Care & Cleaning
□ Regularly clean your patio heater between uses and especially after extended periods of storage.
□ Ensure the heater control is turned fully to the off position, the gas supply is shut off at the regulator or bottle / cylinder valve, and
□ Never douse the heater with water when its surfaces are hot.
Yellow Tip
Maintenance