Instructions / Assembly

Please do not return this product to the retailer.

If you are missing or have damaged parts please email

contact@ezreplacement.com Or Call 877-477-2264

MADE IN CHINA

Distributed By:

J & J Global, LLC

Irving, TX 75038

PAGE 1
MADE IN CHINA ©2020 J & J Global, LLC Distributed By: J & J Global, LLC Irving, TX 75038 Please do not return this product to the retailer. If you are missing or have damaged parts please email contact@ezreplacement.
PAGE 2
Care Instructions 3pc Gravity Chair Set Sku: 203079PBB, 203079PGB, 203079PRB, 203079PTB Most metal outdoor furniture is finished with paint, varnish, or powder coating to prevent rust. While aluminum doesn’t rust–it can oxidize (causes pitting & dulls the finish). So maintaining your furniture will extend its life & make it easier to clean. · Wash all frames with a solution of mild soap (like dish soap) and water.
PAGE 3
1 Take the product out of the packaging carefully. Place the rear leg of the lounger on a stable surface, then hold the back of the lounger with one hand and with the other hand hold the arm. Push the back of the lounger and arm in opposite directions as per following picture. After opening the lounger ensure the front and rear legs are standing on a stable surface by stepping the on the rear leg. Ensure the leg frame is positioned on a stable surface. Sit down on the chair slowly and carefully.
PAGE 4
Please follow instructions below after reading all instructions on page. 3 2 Please follow instructions below to attach cup holder.