ASSEMBLY INSTRUCTIONS RESIN GARDEN SHED SKU: T-PS24-0436A BE YOUR LIFE BUILDER www.patiowell.com Resin Garden House Installation Tutorial https://www.patiowell.com/ pages/video-T-PS24-0436A saleservice@patiowell.
SITE PREPARATION Level the ground surface. cem ent Recommendation: Construct a wooden or concrete base as a foundation. The external dimensions of the product : 76.6’’ 103.1’’ 49.
BEFORE STARTING ASSEMBLY Remove all of the pieces from the 2 packages and spread them out on the ground. Before installation, please check the type and quantity of parts first. It is recommended to use a clean work surface to spread the parts out and for pre-assembly steps. Review all instructions before you begin, continue to refer to instructions during assembly. Be sure to follow all steps thoroughly. Please prepare these components in advance at the beginning of each stage.
FLOOR PARTS A1 X4 A2 X4 WALL PARTS B1 X2 B2 X5 B3 X2 B5 X2 B4 X4 B1-1 X1 B1-2 X1 B4-1 X4 04
WINDOW PARTS W1 X4 W2 X2 ROOF PARTS F1 X2 F2 X4 F3 X2 C7 X2 F4 X1 F5 X2 F6 X1 C1 X1 C2 X1 C3 X1 C4 X1 C5 X1 E3 X2 C6 X1 E2 X1 E4 X4 05
DOOR PARTS D1-2 X2 D1 X1 D1-4 X1 D1-1 X1 ACCESSORIES C7-1 X2 F4-1 X1 F4-2 X1 E1 X2 D1-3 X1 D1-1-2 X2 D1-2-1 X1 B1-2-1 X1 A1-1 X4 06
SCREW cm 179+2 pcs 1 inch 2 0.5 3 1 12+2 pcs inch 1 M5*14 2 0.5 SC4x30 54+2 pcs 1.5 SC5x14 cm cm 4 3 1 1 inch 2 0.5 3 1 1.5 SC5x30 cm 4 8+2 pcs 1.5 inch 1 SC5x12 M4*30 M5*30 2 0.5 4 3 1 4 1.5 M5*12 CHOOSE THE LOCATION OF THE WINDOW Multiple methods exist for installing wall panels with windows, with our instructions detailing the first method of installation.
CONTENTS Floor Part Instruction 09-13 (page) Wall Part Instruction 13-22 (page) Roof Part Instruction 23-30 (page) Door Part Instruction 31-33 (page) 08
STEP 1 A2 A1 STEP 2 A2 A2 A1 09
STEP 3 A1 A2 A2 A1 STEP 4 A1 A1 A2 A2 10 A1
STEP 5 A1 A2 A1 A2 A2 A1 STEP 6 A1 A2 A2 A1 A2 A2 11 A1
STEP 7 A1 A2 A2 A1 A1 A2 Insert A1 at an angle.
STEP 8 SC5x14 Screw position SC5x14 16 pcs STEP 9 ① ② W2 W1 W2 W1 W1 Textured side facing down.
STEP 10 B1 STEP 11 B2 B1 14 B1 B1
STEP 12 B4 STEP 13 B2 15
STEP 14 B4 STEP 15 B2 16
STEP 16 B5 B5 STEP 17 B2 17 B5
STEP 18 B5 B5 B5 STEP 19 B3 18
STEP 20 B4 STEP 21 B2 19
STEP 22 B4 STEP 23 B3 20
STEP 24 B1 STEP 25 Note: After installing B1-1, B1-2 in B1-1/B1-2 sequence, please measure whether the size is equal to 30mm (as shown in the picture).
STEP 26 Do not hit the screws here yet. B4-1 SC5x14 SC5x14 21 pcs STEP 19 27 Do not hit the screws here yet.
STEP 28 Note the snaps on C7-1. C7-1 C1 C7 C2 SC5x14 SC5x14 C3 For Front Door SC5x14 3 pcs STEP 29 Note the snaps on C7-1.
STEP 30 SC5x14 SC5x14 SC5x14 6 pcs STEP 31 SC5x14 SC5x14 24 SC5x14 7 pcs
STEP 32 E2 SC5x12 E3 E3 SC5x12 8 pcs STEP 33 E1 SC5x14 E1 25 SC5x14 4 pcs
STEP 34 SC5x30 SC5x30 4 pcs STEP 35 SC5x30 F3 F2 F2 F1 26 x2 SC5x30 18 pcs
STEP 36 28 F3 F2 F2 F1 F1 F3 F2 F2 Adjusting roof and wall joints with a scraper.
STEP 37 F6 F4-2 F5 F5 F4-2 F4 F4-1 F4-1 STEP 38 CLICK F4-1 28
STEP 39 Note: Another person should be on the outside to hold down the roof while the screws are being driven.
STEP 40 E4 E4 SC5x14 30 SC5x14 24 pcs
STEP 41 D1-2 167.8mm SC5x14 D1-4 D1-1 D1 D1 √ × SC5x14 Note: After installing D1, D1-1, D1-4, D1-2 in sequence, please measure whether the size is equal to 167.8mm (as shown in the picture).
STEP 43 SC4x30 B1-2-1 SC4x30 6 pcs SC4x30 STEP 44 A1-1 32 x4
STEP 45 SC5x30 33 SC5x30 30 pcs
CARE & SAFETY • In case of fire, do not attempt to extinguish any burning polypropylene with water Unsuitable for storage of flammable or corrosive substances. • It is of utmost importance to assemble all of the parts according to the directions. Do not skip any step. • Please consult your local authorities if any permits are required to erect shed. • Periodically check shed to assure that it remains stable and that the site remains level.
