Manual

- 8 -
5. Installation
5-1. Front Cover
Upright Inverted Sideways
• Request the installation and wiring be performed by a professional contractor. Otherwise, there is the
possibilitythatre,electricshockorfallingfromhighplacesmayresult.
WARNING
This product can be panel or wall mounted. Please attach in accordance with the procedure for mounting
afterremovingthefrontcover.Refertothefollowinggure(frontview)forthemountingdirection.
Wheninstallingoradjustingthevolumecontroltothisproduct,pleaseopenandclosethefrontcoverinthefollowing
manner.
(1) Turn the front cover in the counter clockwise direction 45 degrees.
Assure there is ample rotation space available for the front cover when mounting.
(2)Whenattachingforwall-mounting,pullthefrontcoverforwardtoremove,thenpull-outthemountingscrewand
O-ring.
(3) Please attach the parts removed in steps 1 and 2 in the reverse order to reassemble. Attach the front cover so that
the“↑UP”isontop.(MountingScrewRecommendedTorque:0.3N-m)
UsetheM3X6tappingscrewindicatedonthelower-rightguretoxthefrontcover.
(Recommended Torque: 0.3 N-m)
Attach the front cover so that the
arrow is alligned as indicated above.
(100)
Open
Mounting Screw
Volume
[mm]
Cover Locking
Hole
Cover Locking
Screw