Data Sheet

ManualsBrandsPatlite ManualsAutomationPatlite Sounder EHS-M1TE 12 V DC 110 dB

1. Specifications

1-1. General Specification

Conditions

At maximum volume and "Rapid Hi-Lo" alarm playback

Storage Ambient Humidity

Less than 85% (No condensation)

9A or less (at DC24 V)

12.5A or less (at DC35 V)

Less than 85% (No condensation)

Typ.

5.9W (at DC 12 V)

Conditions

At maximum volume and "Rapid Hi-Lo" alarm playback

Max.

7.6W (at DC 31.6 V)

KC (KN22, KN24)

Mounting Location

Indoors/Outdoors

Upright Installation

Operating Voltage Range

Mounting Direction

Upside-down

Upright

Sideways

Protection Rating

Environmental Condition

IP65 (IEC 60529)

RoHS Directive (EN 50581)

UL 464, CSA-C22.2 No. 205-M1983

Rated Power

Consumption

(for PNP/Voltage Input)

Withstand Voltage

500VAC applied for 1min between terminals and chassis without breaking insulation

Environmental

Condition

Sound Pressure Level

Operating Ambient Humidity

Storage Ambient Temperature

-30

℃

to +60

℃

-20

℃

to +50

℃

5.0W (at DC 12 V)

At maximum volume and "Rapid Hi-Lo" alarm playback

4A or less (at DC12 V)

Remarks

UL Listed (File No.S24210)

Mass (Tolerance ±10%)

FCC Part15 SubpartB Class A

Vibration Resistance

45.0m/s

IEC 60068-2-6:2007 (Upright Position)

Insulation Resistance

More than 1MΩ at 500VDC between the terminals and the chassis

1.25kg

250m/s

6ms for 1,000 times (3 axis 1 direction); 500m/s

11ms for 3 times (3 axis both directions)

IEC 60068-2-27:2008 (Upright Position)

EMC Directive (EN 61000-6-4, EN 61000-6-2)

SD Card Format

FAT 16, 32

Impact Resistance

Compliance Standards

DC10.8 V-DC 35V

Max.

450mA

Rated Power

Consumption

(for NPN/No-voltage)

Max.

5.2W (at DC 12 V)

Conditions

At maximum volume and "Rapid Hi-Lo" alarm playback

Rated Current Consumption

Conditions

Inrush Current

Maximum: 110 dB

Page

SPECIFICATIONS

Drawing No.

Rev.

Recommended Parts: SDV-2GP (option)

Supported Memory Card

Product Name

Melody/Alarm Horn

Typ.

Model

EHS-M1

Rated Voltage

DC12 V-DC 24V

Upright position from horn opening at a distance of 1m.

Volume at maximum and "Stutter" alarm played

Outer Dimensions

7. Outer Dimensions

SD Card / SDHC Card

Operating Ambient Temperature

1/13

EHS-W18

Summary of content (13 pages)

PAGE 1
Drawing No. Rev. Page EHS-W18 F 1 / 13 SPECIFICATIONS 1. Specifications 1-1. General Specification Product Name Model Rated Voltage Operating Voltage Range Rated Current Consumption Max. Typ. Rated Power Conditions Consumption Max. (for NPN/No-voltage) Conditions Typ. Rated Power Conditions Consumption Max.
PAGE 2
Product Name Model Rated Voltage Operating Voltage Range Rated Current Consumption Max. Typ. Rated Power Conditions Consumption Max. (for NPN/No-voltage) Conditions Inrush Current Operating Ambient Temperature Operating Ambient Humidity Storage Ambient Temperature Storage Ambient Humidity Mounting Location Drawing No. Rev. Page EHS-W18 F 2 / 13 Melody/Alarm Horn EHS-M2 AC100V - AC240V (50/60Hz) AC90V - AC264V (50/60Hz) 140mA 6.9W (at AC 240 V) At maximum volume and "Rapid Hi-Lo" alarm playback 7.
PAGE 3
Drawing No. Rev. Page EHS-W18 F 3 / 13 1-2. Performance Specifications Volume Control Sound Playback Number of Playback Channels Alarm/Melody Playback start-up time 1-3. Signal Input Specification Signal Input Condition Signal Input Priority Contact Control Method Contact Closed-Circuit Current Contact Open-Circuit Voltage Volume Adjustable: Min. - Max. Sound Reduction Input: It is a value specified as a reduction from the currently adjusted volume.
PAGE 4
Drawing No. Rev. Page EHS-W18 F 4 / 13 2. Model E H S - M1 H A Rated Voltage Wiring Specifications Melody Type M1 DC 12 V-DC 24V H Cable A Type A M2 AC 100 V-AC 240V T Terminal Buss C Type C D Type D E Type E 3. Wiring Diagram - Non Voltage Contact Channel 8 Blue Channel 7 Green With NPN Transistor Channel 6 Orange Channel 5 Red Channel 4 Bright green Channel 3 Pink EHS-□H□ Cable EHS-□T□ Terminal Buss Channel 2 Yellow L AC Power Supply Channel 1 Lt.
PAGE 5
Drawing No. EHS-W18 Rev. Page F 5 / 13 When connecting a Source-type PLC, be sure to insert a diode as indicated in the drawing below. Failure to insert a diode will lead to possible malfunction. Source Type PLC OUT DIODES Channel 8 Blue EHS-□H□ Cable EHS-□T□ Terminal Buss Channel 7 Green OUT Channel 6 Orange OUT Channel 5 Red OUT Channel 4 Bright green OUT Channel 3 Pink OUT Channel 2 Yellow OUT Channel 1 Lt.
PAGE 6
Drawing No. Rev. Page EHS-W18 F 6 / 13 4. Part Names and Functions A. Volume Volume adjustment is done by turning the volume. * Factory Setting: Center Position Inside Cover B. SD Card Slot (side) The SD card can be used in combination with the alarm/melody sounds. C. Mode Switch (DIPSW) The setup for various functions is possible.
PAGE 7
Drawing No. EHS-W18 Rev. Page F 7 / 13 5. Functionality Details 5-1. Sound Group The sound groups that can be played back are selectable from eight groups of A through H with the Mode Switch (DIPSW). (For bit input) A sound group cannot be selected when "(2) channel input method" is set for binary. Sounds for group H can be rearranged freely. In order to transfer the setting data, the SD card can be used for recombination and transmitting it to the product.
PAGE 8
Drawing No. Rev. Page EHS-W18 F 8 / 13 5-2. Channel Input Method Channel input mode can be selected for bit/binary with the Mode Switch (DIPSW). With the bit input, channels 1-8 can be used to reproduce up to eight channels. (When sound reduction is OFF) With the binary input, channels 1-6 can be used to reproduce up to 32 channels. Bit Binary * Factory Setting : Bit Binary Input Table Sound No.
PAGE 9
Drawing No. Rev. Page EHS-W18 F 9 / 13 5-3. Sound Reduction - (5) Forced Playback OFF With the sound reduction function turned ON, when a signal input is put on channel 8, the sound level is reduced at playback. The sound pressure for the sound reduction can be preset. (-10dB,-20dB,-30dB) The Sound Reduction Function can be selected with the Mode Switch (DIPSW). When the Sound Reduction Function is turned ON, the number of channels available for playback in the Bit Input Mode is set to seven.
PAGE 10
Drawing No. Page Rev. 10 / 13 F EHS-W18 5-4. Sound Mode The alarm/melody audibility reprodution can be selected with the Mode Switch (DIPSW). "Factory Mode" "Public Address Mode" - Factory Mode -- The audible sound is suitable as a warning alarm. - PA Mode -- The audible sound is suitable for public announcements. * Factory Setting: "Factory Mode" 5-5. Forced Playback When the Forced Playback mode is turned ON, it will play back after power is supplied, even with no signal input.
PAGE 11
Drawing No. Rev. EHS-W18 F Page 11 / 13 6. Timing Chart It only plays back while the signal input is maintained. Playback will be stopped as soon as the signal input is lost. Repetitive playback occurs when the signal input is maintained. - Channel Input Method : Bit Input Channel1 Channel2 Channel3 Channel4 Playback Channel 1 1 2 3 2 4 4 3 1 * All channels above 5 are the same.
PAGE 12
Drawing No. Rev. EHS-W18 F Page 12 / 13 7. Outer Dimension Drawing [mm] Number 1 2 3 4 5 Part Names Case Cover Cable Angle Bracket Waterproof Gland * (3) is attached only to EHS-□H. Material PC PC UL2464 (AWG18x2C+AWG22x9C) φ9 SUS304 t=3.
PAGE 13
Drawing No. Page Rev. 13 / 13 F EHS-W18 8.