Data Sheet

- (5) Forced Playback OFF
With the sound reduction function turned ON, when a signal input is put on channel 8,
the sound level is reduced at playback.
The sound pressure for the sound reduction can be preset. (-10dB,-20dB,-30dB)
The Sound Reduction Function can be selected with the Mode Switch (DIPSW).
When the Sound Reduction Function is turned ON, the number of channels available
for playback in the Bit Input Mode is set to seven.
* Factory Setting: No Sound Reduction
- (5) Forced Playback ON
With a Forced Playback, if a signal line input occurs, the playback sound can be reduced.
The sound reduction level can be selected by the channel input.
Priority rank is channel3>channel2>channel1.
Channel3 -30dB
Signal Input Condition
Sound Reduction Volume
None No Sound Reduction
Channel1 -10dB
Channel2 -20dB
-20dB
-30dB
Mode Switch Condition
Sound Reduction Volume
No Sound Reduction
-10dB
5-3. Sound Reduction
Drawing No.
Rev.
Page
F
9/13
EHS-W18