Data Sheet

-
Channel1
Channel3
Channel4
Channel2
Channel2
Playback is stopped when the signal input (Playback) is removed.
No.5
Hold Playback
- Channel Input Method : Bit Input
Channel1
Repeated playback is done by maintaining a signal input (Playback).
It only plays back while the signal input (Playback) is maintained.
It does not play back if a signal input (Playback) is a pulse input.
Channel4
Stop / Clear
No.1
Channel3
No.5
- Channel Input Method : Binary Input
No.2 No.1
No.1
* The wavy line indicates when playback was stopped and the message No. which was the changed signal
input (Playback) is played.
No.1
- During a Stop / Clear Input
Message No.
Channel1
* The wavy line indicates when playback is stopped.
No.1No.15
No.4
No.1
* All channels above 5 are the same
No.2
No.3
No.6 No.7No.2 No.15Message No.
No.2No.1 No.4Message No.
* The wavy line indicat
es when playback was stopped and the message No. which was the changed signal
input (Playback) is played.
No.3
* All channels above 5 are the same
No.1
No.EHV-W18F-10_18