Data Sheet

* Factory Setting :
-
Channel1
- Channel Input Method : Binary Input
* All channels above 5 are the same
- During a Stop / Clear Input
Message No.
Channel1
No.1 No.1
The signal input (Playback) is maintained only when the input is held on.
No.1
Stop / Clear
No.1
* The wavy line indicates when playback is stopped.
5-3. Playback Mode
If a signal input (Playback) is a pulse input, playback is ended as soon as the pulse input is off.
Channel4
No.1
Channel2
No.1No.1Message No.
- Channel Input Method : Bit Input
* All channels above 5 are the same
Channel1
No.3No.15
No.3No.2
Message No.
Channel2
No.4
Channel4
No.3
Hold Playback
No.2
No.8No.6No.1 No.15
Normal Playback
Memory PlaybackInput Priority Playback
The Mode Switch (DIPSW) can select from four different kinds of playback modes.
Normal Playback
Normal Playback
Channel3
Channel3
When "(5) MP3 setup" is OFF, the hold playback function is active, regardless of the Mode Switch position.
The signal input (Playback) becomes invalid during playback.
No.EHV-W18F-8_18