Data Sheet

-
No.10
Channel1
Stop / Clear
- During a Stop / Clear Input
* All channels above 5 are the same
No.1
Message No.
Message No.
No.1
- Channel Input Method : Binary Input
Channel1
- Channel Input Method : Bit Input
Input Priority Playback
When a signal input (Playback) is on during playback, the playback is stopped and the channel from the signal input
(Playback) is reproduced.
No.5 No.10
* The wavy line indicates when playback was stopped and the message No. which was the priority signal
input (Playback) is played.
No.2
Channel3
Channel4
No.6
Channel2
Channel2
* All channels above 5 ar
e the same
Channel3
No.2 No.8
No.1
Channel4
No.1
* The wavy line indicates when playback was stopped and the message No. which was the priority signal
input (Playback) is played.
Channel1
No.2
Message No. No.3 No.1 No.4No.2
If the signal input (Playback) is a pulse input, even with the input held, playback plays only once.
No.2No.4 No.1
* The wavy line indicates when playback is stopped.
No.15 No.14 No.8 No.9
No.EHV-W18F-9_18