Manual

- 9 -
5-2. Wiring
Wiring Example
When handling this product, please do so after discharging static electricity from on the body. Discharge the
static electricity by touching other metal parts. In addition, do not touch parts in areas not specifed in this
manual. Possible static electricity may destroy parts or the wire leads on the underside of the board may
cause injury.
Be sure to turn off the power before connecting wires. Possible short circuiting or burning-out of the internal
circuitry may occur.
Ensure wiring is properly performed before connecting power.
To prevent noise, make wire connections short and use shielded wiring. If installed where high voltage wiring
is nearby, inductive noise may cause malfunctioning.
L
- +
- +
- +
+
-
Max 500mA
Shielded Cable
DC24V
Speaker
8
Ω
Max 40VDC
External
Amplifier
SP- SP+ AUX- AUX+
BUSY- BUSY+ 24V 0V FGDEC2
DEC1
/VOL
COM CH1 CH2 CH3 CH4 CH5 CH6 CH7 STB CLRSTOP
AUX
GND
%CWVKQP
Please
Do not connect the input connections to the power supply. Possible malfunction may occur