Data Sheet
LA6-W18D-21_26
5.3.2. LED Color Change/Version Conrmation
When all LED tiers ash a green color, the “LED Color Change/Version Conrmation” can be selected while it is in that status. As
shown in the following gure, when the Multiple-function Button is pushed for about 0.5 seconds, 3 dierent selections: the “LED
Color Change”; “Version Conrmation”; and returning to “Signal Tower” mode, can be selected. Once the selection is made, if the
Multiple-function button is pushed about 3 seconds longer, then the mode goes into the status selected.
5.3.2.1. LED Color Change
The LED color which operates in the “Signal Tower” mode can be changed. First, the LED color change starts from the1st tier
where the red LED turns on. As shown in the following gure, whenever the Multiple-function button is pressed for a short time
(about 0.5 second), the 1st LED Tier color changes in order.
Push Button
About 3 sec.
Push Button
About 0.5 sec.
LED Color Change
Version Conrmaton
Returns to “Signal
Tower” mode
Push Button
About 3 sec.
Push Button
About 0.5 sec.
Push Button
About 3 sec.
Push Button
About 0.5 sec.
Push Button
About 3 sec.
The contents are
selected and entered
Returns back to “Signal Tower” mode
if no input occurs after 15 seconds.
Green White OFF