Signal Tower Specifications [Type: LA6] LA6-W18D-1_26
Table of Contents 1. Specifications 3 2. Model Number Configuration 5 3. Part Names and Dimensions 6 3.1. Outer Appearance List 6 3.2. Part Names and Outer Appearance 7 3.3. Attachment Angle Part Names and Dimensions 8 4. Wiring 4.1. 4.2. 5. 6. 9 Wiring Examples 9 4.1.1. When connecting to relay contacts 10 4.1.2. When connecting to a PLC (NPN Transistor) 10 4.1.3. When connecting to a PLC (PNP Transistor) 11 Current Capacity 12 Operating Directions 13 5.1.
1. Specifications Model LA6- D - Rated Voltage (Refer to “2. Model Number Configuration”) DC24 V Operating Voltage Range ±10% of Rated Voltage Standard Rated Power Consumption Maximum Environmental Condition LA6-5 D LA6-3D LA6-5 D LA6-3D N-RYGBC 5.0W N-RYG 3.5W N-YYYYY 7.0W N-YYY 4.5W LA6-5 D 6.5W B-RYG 4.5W B-YYYYY 8.0W B-YY 5.5W LA6-3D LA6-5 D LA6-3D Alarm: Tone No.
Alarm Sound (Typical Frequency) No.1 2400Hz Continuous beep sound No.2 2400Hz Rapid intermittent beep (0.05 sec. sound / 0.05 sec. silent) No.3 2400Hz Long intermittent beep (1.5 sec. sound / 1.5 sec. silent) No.4 2400Hz Fast intermittent beep (0.5 sec. sound / 0.5 sec. silent) No.5 3600Hz Continuous beep Sound No.6 3600Hz Rapid intermittent beep (0.05 sec. sound / 0.05 sec. silent) No.7 3600Hz Long intermittent beep (1.5 sec. sound / 1.5 sec. silent) No.8 3600Hz Fast intermittent beep (0.
2. Model Number Configuration Model Number 3 or WJ TN LJ 5 Model LED Tiers LA6- ↓ Tiers Rated Mounting/Wiring Installation Voltage D D Body Color Flashing/Alarm Option Color ↓ ↓ -RYGBC ↓ Color for each tier in “Signal Tower” mode (Factory default): R /C(White) (Red)/Y(Amber)/G(Green)/B(Blue) (The LED light color for each tier can be changed after purchase.
3. Part Names and Dimensions 3.1. Outer Appearance List The full product appearance is indicated according to its model number. Refer to the model numbers as a reference to its appearance. 3 Number of Lens Tiers WJ Mounting/Wiring Installation Body Color Flashing/Alarm (Option) B N B 5 Lens Tiers TN LJ W / U Off-white N B LJ TN WJ N Lens Tiers Silver (Not available for the L J type.
3.2. Part Names and Outer Appearance Each figure contains 5 lens tiers, with Flashing/Alarm functions. For 3 lens tiers, the outer lens height will be shorter. Also, for models not including the Flashing/Alarm functions, the product will not include an alarm unit. ■ W J Direct mount with cable connection Direct mount with Screwless Terminal Block connection ■ TN 2 TN Spec. Underside View 1 1 (Unit:mm) 16 16 Threaded hole for cable gland attachment (M16×1.
3.3. Attachment Angle Part Names and Dimensions (Unit: mm) Top View 5 .5 φ 22 φ 5 32 20 60 81 ‘L’ Bracket Side View Rear View 4.
4. Wiring The wiring example indicates how to connect to external contacts for every classification. If there are any special applications that require asking questions concerning this product, feel free to contact your PATLITE Sales Representative. 4.1.
4.1.1. When connecting to relay contacts External Contact Classification Do Not Apply Voltage! LA6 Voltage Contact Relay For Flashing/ Pulse Enable External Contact N Without flashing/alarm B With flashing/alarm Flashing/Pulse Enable Brown / ⑨ Common line LED Tier 3 / Input 3 Red /① Orange / ② Green / ③ LED Tier 4 / Input 4 Blue LED Tier 1 / Input 1 LED Tier 2 / Input 2 Alarm 1 / Input 6 4.1.2.
4.1.3.
4.2. Current Capacity LA6 Inrush Current External Contact Classification Voltage Contact Relay or PLC N Without flashing/alarm B With flashing/alarm Flashing/Pulse Enable Common line Brown / ⑨ ※1 Do not connect! Relay Each LED/Alarm※1 Input1 - 7 Each Color / ① ~ ⑦ Pink /⑪ Power Supply Wire Gray /⑩ Mode Change※2 ※1 B Flashing/Alarm type only. ※2 There is no inrush current on the Pink wire for “Mode Change.
5. Operating Directions This product contains a multi-function button (Refer to”3.2. Part Names and Outer Appearance”) under the Head Cover in the upper section, which can be operated as follows: - Alarm Sound Control: Adjustable up to four steps. - LED Color Change: The luminescence color of each tier can be changed. - Version Confirmation: The current version of the product can be checked. - Product Initialization: The memory contents of the product can be cleared and returned to factory default values.
• “Signal Tower” mode operation example LED Tier 1 LED Tier 2 LED Tier 3 LED Tier 4 LED Tier 5 Buzzer Operating Condition Group/Pattern No. OFF OFF OFF OFF OFF Mute Blue Blue Blue Blue Blue Tone 1 OFF Blue Blue Blue Blue Tone 2 OFF OFF Blue Blue Blue Tone 7 OFF OFF OFF Blue Blue Mute OFF OFF OFF OFF Blue Mute 1/1 1/2 1/3 1/4 1/5 ... Red Red Red OFF OFF Mute Red Red Red Red Red Mute Red Red Red Red Red Tone 11 Red Flashing Red Flashing Red Flashing Red Flashing Red Flashing Tone 13 ...
• Setup Parameters This mode has parameters that can be set up as shown in the following table. Setup Range Every Group Every Pattern Every Tier Setting Index Description Display Repeats When even the last set-up pattern changes and display time is exceeded, it is either selected to return to the head pattern of the group, or is considered as the last pattern. Display Time Unit Every 1 second and every 0.1 seconds are selected for the display time in units, to be set up for each pattern.
• “Time-trigger” mode Operation Example The following are examples of the “Time-trigger” mode operation. In addition to time progress and pattern changes, the figure also shows the “Mute” input operation. LED Buzzer Operating Condition OFF Mute 1/1 1/2 1/3 1/4 Mute 1/5 ... 1/60 1/61 1/62 OFF Mute 1/63 Input 1 Signal Input Input 2 Input 3 Input 4 Input 5 (STOP) Input 6 (Mute) Input 7 (Clear) * The “Time-trigger” mode operating state is an example for setting data.
• Group Input Conversion Table For inputs 1-4, group No. in the combination of ON/OFF can be entered as indicated in the “Pulse-trigger” mode operation example. Table 6. “Pulse-trigger” mode Input Conversion Table Group No. Input 1 1 ON Input 2 2 Input 3 Input 4 ON 3 ON ON 4 ON 5 ON ON 6 7 ON ON ON ON ON 8 ON 9 ON ON 10 11 ON ON ON ON ON 12 13 ON ON ON ON ON ON ON ON ON ON ON 14 15 ON An empty cell indicates the “OFF” condition.
In addition to trigger input and pattern changes, the figure shows the operation of the “Mute” input and the “Clear” input. Operating Condition LED OFF Buzzer Mute Signal Input Input 1 1/- 1/1 1/2 Mute 1/3 ... 1/60 1/61 1/62 1/1 1/2 OFF Mute Input 2 Input 3 Input 4 Input 5 (STOP) Input 6 (Mute) Input 7 (Clear) Note The one shot trigger input pulse acquires only the rise-time of the input. Refer to “7.1. Basic Signal Input Time Chart” for more details. 5.2.3.
• Group Input Conversion Table For inputs 1-5, Group numbers in combination of ON/OFF can be entered as indicated in the “Single-display” mode operation example. Table 7. “Single-display” mode Input Conversion Table Group No. 1 Input 1 ON ON ON 19 ON 20 ON 21 ON ON 22 ON ON 23 ON 24 ON 25 ON ON 26 ON ON 27 ON ON 28 ON ON 29 ON ON ON 30 ON ON ON 31 ON 10 11 ON 12 13 ON 14 15 Group No.
5.3. Multi-function Button Operation This product contains a multi-function button (“3. Part Names and Dimensions”) under the Head Cover in the upper section, which can be operated as follows: : Four adjustable steps. - Alarm Sound Control - LED Color Change : The luminescence color of each tier can be changed. : The current version of the product can be checked. - Version Confirmation - Product Initialization : The memory contents of the product can be cleared and returned to factory default values.
5.3.2. LED Color Change/Version Confirmation When all LED tiers flash a green color, the “LED Color Change/Version Confirmation” can be selected while it is in that status. As shown in the following figure, when the Multiple-function Button is pushed for about 0.5 seconds, 3 different selections: the “LED Color Change”; “Version Confirmation”; and returning to “Signal Tower” mode, can be selected.
To change the LED color to a different preference, by pushing the Multiple-function for about 3 seconds, the expected color status that is on (such as the 1st LED tier color) can change to the next LED tier color (such as the 2nd LED tier color) by selecting the desired lighted state. Once the last LED tier color is changed and the Multiple-function Button is pushed about another 3 seconds, all LED color changes are complete. Push Button About 3 sec. Push Button About 0.5 sec. Push Button About 0.5 sec.
For a detailed verification of the current version, the “EDITOR for LA series” software application can be used to check from the PC. If there is no personal computer, etc., available in its environment, contact your nearest Patlite Sales Representative and tell them the status of LED tiers displayed to determine the current firmware version.
5.4. Factory Default Data 5.4.1. “Signal Tower” mode The following chart indicates the default set up values. Setup Index 5.4.2. Setup Contents LED Tier 1 Color Red LED Tier 2 Color Amber LED Tier 3 Color Green LED Tier 4 Color Blue (No setup if it is a 3 tier model) LED Tier 5 Color White (No setup if it is a 3 tier model) Alarm 3 Tone Tone No. 3 Flashing Cycle 60 fpm “Smart Mode” The following chart indicates the default set up when entering the “Smart Mode.
6. Changing Data With the “EDITOR for LA series” application software, setup data can be changed and transmitted into this product. • Necessary Items • • • • This product Personal Computer (with all hardware operating normally) Micro-USB Cable for Charging/Data Transfer (* USB-A male to USB Micro-B male is not included with this products) “EDITOR for LA series” Application Software (Visit our homepage at http://www.patlite.com/ to download it.
7. Time Chart A signal input and its input signal recognition are determined based on the time chart shown below. This product is roughly classified into two input signals, as indicated from the following contents. - Standard Input Signal: All input signals, except a trigger input, are level hold inputs. - Trigger Input Signal: It is a one shot input. (Only for the “Pulse-trigger” mode) Refer to “5. Operating Directions” for details.