ITEM #351-8317 8-LIGHT ISLAND LIGHT MODEL #82264 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
PACKAGE CONTENTS B A G C H D F E PART A B C D DESCRIPTION Canopy Mounting Bracket Chain Threaded Pipe QTY 1 1 2 2 PART E F G H 2 DESCRIPTION Socket Coupling Canopy Loop Fixture Loop QTY 8 2 2 2
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB CC Threaded Knob Short Qty: 2 Machine Screw Qty: 2 DD Long Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-800-554-6504, 8 a.m. - 4:30 p.m., EST. WARNING: • IMPORTANT: NEVER attempt any work without shutting off the electricity.
ASSEMBLY INSTRUCTIONS 1. Screw threaded pipes (D) onto couplings (F). Next, screw fixure loops (H) onto threaded pipes (D). 1 H Note: The electrical cable will need to get pulled through the individual parts as they are installed on this and later steps. D Note: The hanging height for this fixture is adjustable. Add or subtract threaded pipes to achieve the desired height. F 2. To open chain links: 2a Locate the split in the chain link (K) you're removing.
ASSEMBLY INSTRUCTIONS 3. Insert long machine screws (DD) through mounting bracket (B) so the long machine screws (DD) protrude outward. Orient the mounting bracket (B) so the raised center portion protrudes into the outlet box (not included). Connect the mounting bracket (B) to the outlet box with short machine screws (BB). Outlet Box 3 Hardware Used BB Short Machine Screw x2 Long Machine Screw x2 DD BB B DD 4. Connect the canopy loops (G) to the fixture loops (H) using chain (C).
ASSEMBLY INSTRUCTIONS 5. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 7. Insert 60-watt max. candelabra bulb or LED equivalent (none included) into socket (E). 7 Repeat for remaining sockets.
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Fixture does not light. 1. Fixture may be wired incorrectly. 2. Worn or broken bulb. 1. Check wiring. 2. Replace bulb.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m., EST, Monday - Friday. PART B AA BB CC DD DESCRIPTION Mounting Bracket Wire Connector Short Machine Screw Threaded Knob Long Machine Screw B PART # XBAR05 WC001 SCR832X050 TK2X832-NI SCR832X150 AA BB CC DD Printed in China Rev.