Installation Instructions

ManualsBrandsPatriot Lighting Elegant Home ManualsChandeliersPatriot Lighting® Elegant Home Astaria Matte Black & Faux Wood 5-Light Chandelier

SKU NUMBER: 351-8403

5 Light Chandelier

MODEL NUMBER: MND4326A

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-645-3184,

Monday - , 7:30 a.m. -4:00 p.m., CST .Friday

PACKAGE CONTENTS

REVISED 2019-04-12

Stock Part#

1pc

PART

DESCRIPTION

QUANTITY

AA Crossbar Assembly

1pc

3pcs

2pcs

Wire Connector

Outlet Box Screw

Quick Link

1pc

Ceiling Canopy

Fixture Chain

N/A

Fixture Body

5pcs

Shade

G14180SH

Socket Collar

5pcs

Vintage Bulb

5pcs

N/A

Summary of content (6 pages)

PAGE 1
SKU NUMBER: 351-8403 5 Light Chandelier MODEL NUMBER: MND4326A REVISED 2019-04-12 PACKAGE CONTENTS PART DESCRIPTION QUANTITY Stock Part# AA Crossbar Assembly 1 pc BB Wire Connector 3 pcs CC Outlet Box Screw 2 pcs DD Quick Link 2 pcs A Ceiling Canopy 1 pc EE Fixture Chain 1 pc B Fixture Body 1 pc C Shade 5 pcs D Socket Collar 5 pcs E Vintage Bulb 5 pcs A AA BB N/A B CC DD EE G14180SH N/A C E D Questions, problems, missing parts? Before returning to your retailer,
PAGE 2
HARDWARE CONTENTS Note: Hardware not shown actual size. AA EE Crossbar Assembly x1 BB Wire Connector x3 CC Outlet Box Screw x2 DD Quick Link x2 Fixture Chain x1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING: ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
PAGE 3
ASSEMBLY INSTRUCTIONS STEP 1: a. Once the installation method is determined, attach the end of the side chain to hooks. b. Insure chain has no twists or kinks. Note : For versatility, this fixture can be installed with glass pointed up or down. Option 1 Option 2 STEP 2: Outlet Box a. Secure the crossbar (AA) to the outlet box (not included) with outlet box screws (CC). b. Tighten until snug. Note : The preassembled mounting nipple on the crossbar should protrude outward. AA CC STEP 3: a.
PAGE 4
ASSEMBLY INSTRUCTIONS STEP 4: a. Choose desired hanging length for the light fixture. Suggested mounting height over a table or island is 30 inches from the table/island top to the bottom of the fixture. b. Adjust the Fixture Chain (EE) to the desired length, removing links if needed. c. Connect one end of the Fixture Chain (EE) to the canopy chain loop preassembled to Crossbar Assembly (AA) with one Quick Link (DD). d.
PAGE 5
ASSEMBLY INSTRUCTIONS STEP 6: a. Unthread the canopy lock ring. b. Slide canopy lock ring and ceiling canopy (A) down the quick link. c. Push all slack fixture wire through canopy chain loop and into the outlet box. d. Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box. e. Separate the smooth side and ribbed side of the supply wire to about 3 inches from the end. f. Using wire strippers, strip each wire ½ inch from the end.
PAGE 6
ASSEMBLY INSTRUCTIONS STEP 9: a. Remove the socket collar (D) from the socket on the fixture body (B). b. Then place the shade (C) over the socket on the fixture body (B) as shown. c. Secure by threading the socket collar (D) onto the socket. d. Hand-tighten until snug. D C STEP 10: a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage. Your installation is completed now. Restore electricity. Retain this sheet for future reference.