Installation Instructions

CARE AND MAINTENANCE

TROUBLESHOOTING

1) The light does not come on at all:

2) Fuse blows or circuit trips when light is turned on.

a) Make sure the wall switch and circuit breaker are on.

b) Make sure the wiring is correct.

a) Check for crossed wires, ensure wiring is correct.

If unable to fix any of the above issues, please consult a certified electrician.

• To clean, turn off and wipe with a damp, non-abrasive cloth.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-645-3184,

Monday - , 7:30 a.m. -4:00 p.m., CST .Friday

STEP 10:

a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.

Your installation is completed now. Restore electricity. Retain this sheet for future reference.

STEP 9:

a. Remove the socket collar (D) from the socket on

the fixture body (B).

b. Then place the shade (C) over the socket on the

fixture body (B) as shown.

c. Secure by threading the socket collar (D) onto the

socket.

d. Hand-tighten until snug.

ASSEMBLY INSTRUCTIONS