Installation Instructions

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 356-4025

356-4026

OUTDOOR WALL LANTERN

Model Number: OW4025MG

OW4026MG

Page 1 of 4

191113

HARDWARE CONTENTS Note: Hardware not shown actual size.

Mounting Plate Unit

Mounting Screw

Wire Connector

Bolt Nut

Rubber Pad

Clip

PACKAGE CONTENTS

PAGE 1
Sku Number: 356-4025 356-4026 OUTDOOR WALL LANTERN Model Number: OW4025MG OW4026MG Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS B A C D E F HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 5. Unscrew the set screws. Remove 5 the washers from the frame (D). 6. Put the glass shade (C) into the 6 frame (D) carefully, then secure it with the clips (FF), washers and set screws. Set Screw Washer Set Screw Washer FF C D D 7. Install bulb (not included). See relamping label at socket area or packaging for maximum wattage allowed . 8. Unscrew the two bolt nuts-a. Remove the two rubber pads-a from the two threaded studs on Ball Nut-a the frame (D).
PAGE 4
The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.