Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting5" & 6" 100W Equivalent Daylight Dimmable LED Recessed Retrofit Downlight

PACKAGE CONTENTS

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at

1-844-255-9692 Monday – Friday 8:00 a.m. – 5:00 p.m. CST

PART DESCRIPTION QUANTITY

A LED Retrot 1

B Medium base socket adapter 1

Patriot Lighting® is a registered trademark

5 in./6 in. LED RETROFIT

Sku Numbers: 349-1178 and 349-1179

Model Numbers: 0065-0007-3K and 0065-0007-5K

Summary of content (4 pages)

PAGE 1
Sku Numbers: 349-1178 and 349-1179 5 in./6 in. LED RETROFIT Model Numbers: 0065-0007-3K and 0065-0007-5K Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-844-255-9692 Monday – Friday 8:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A B PART DESCRIPTION QUANTITY A LED Retrofit 1 B Medium base socket adapter 1 1 Patriot Lighting® is a registered trademark of Menard, Inc. All Rights Reserved.
PAGE 2
SAFETY INFORMATION WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes, and/or the current National Electric Code (NEC). Disconnect power to the unit prior to installation. WARNING: To reduce risk of fire, electric shock, or injury to persons, • Read all installation instructions before beginning.
PAGE 3
INSTALLATION INSTRUCTIONS 1. Remove existing light bulb and trim. Confirm that the existing recessed housing’s inside diameter is within the range of 5-1/8 in. minimum diameter to 6-5/8 in. maximum diameter; and that it has a minimum clearance height of 3-3/4 in. clearance height Fig. 1 inside diameter 2. LED Retrofit Downlights are pre-set for use with 5 in. diameter housings. For housings with an inside diameter greater than 5-1/2 in., go to step 3.
PAGE 4
DIMMING INFORMATION • This product is suitable for use in dimming circuits. For 10-100% light control, use with an LED-compatible dimmer (sold separately). CARE AND MAINTENANCE • Use only a mild soap and/or water with a soft cloth to clean the fixture. Harsh chemicals will damage the fixture. Do not wipe the fixture with a rough cloth that may scratch the finish or the lens.