Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor LightingRianto 3-Light 17.75" Diameter Brushed Nickel Convertible Semi-Flush Mount/Pendant Light

Sku number: 352-7552

RIANTO COLLECTION 3 LIGHT

SEMI-FLUSH MOUNT

Model number: 13556

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216

Monday - Friday 9:30 a.m. - 3:00 p.m. EST

PACKAGE CONTENTS

HARDWARE CONTENTS Note: Hardware not shown actual size.

Mounting Bracket

x 1

Threaded Tube

x 1

Screw Collar Loop

x 1

Canopy

x 1

Nipple

x 1

Hex Nut (G 3/8")

x 1

Hex Nut (G 5/32")

x 2

Outlet Box Screw

(short) x 2

Lock Washer

x 1

Ring

(Pre-assembled to

screw collar loop (GG))

x 1

Chain

x 1

Metal Washer

x 1

Cap Nut

(Pre-assembled

to the canopy (JJ))

x 2

Green Ground Screw

(Pre-assembled to the

mounting bracket (AA))

x 1

Hex Nut

x 1

Wire Connector

x 3

Loop

x 1

Rubber Washer

x 1

Support screw (long)

x 2

Summary of content (4 pages)

PAGE 1
Sku number: 352-7552 RIANTO COLLECTION 3 LIGHT SEMI-FLUSH MOUNT Model number: 13556 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216 Monday - Friday 9:30 a.m. - 3:00 p.m. EST PACKAGE CONTENTS A B C D E HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
INSTALLATION (Drop Pendant) (continued) 7. Connect the glossy / live wire from the fixture to the black wire from the outlet box, and the rough / neutral wire from the fixture to the white wire from the outlet box. The bare copper ground wire from the fixture must loop one turn under the head of the green ground screw (CC) on the mounting bracket (AA) before it is connected to the ground conductor of the supply circuit. Cover the wires with wire connectors (II).
PAGE 4
INSTALLATION (Semi-Flush mount) (continued) 4. Cut the bare copper ground wire and fixture wire, and make sure you 4 have enough wire for connecting to the power supply wire. Connect the glossy / live wire from the fixture to the black wire from the outlet box, and the rough / neutral wire from the fixture to the white wire from the outlet box.