Installation Instructions

Sku number: 351-9103

AZARIA 3-LIGHT VANITY LT

Model number: 17689

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216

Monday - Friday 9:30 a.m. - 3:00 p.m. EST

PACKAGE CONTENTS

HARDWARE CONTENTS Note: Hardware not shown actual size.

Mounting Bracket

(Pre-assembled to the fixture

body (A))

x 1

Support Screw

(Pre-assembled to the

mounting bracket (AA))

x 2

40W G9 xenon bulb

x 3

Outlet Box Screw

x 2

Wire Connector

x 3

Green Ground Screw

(Pre-assembled to the

mounting bracket (AA))

x 1

PAGE 1
Sku number: 351-9103 AZARIA 3-LIGHT VANITY LT Model number: 17689 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216 Monday - Friday 9:30 a.m. - 3:00 p.m. EST PACKAGE CONTENTS A B HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
INSTALLATION (continued) 6. Screw the crystal shades (B) onto the each socket of the fixture body (A) as shown in diagram. Note: Please remove the protective film from the canopy back of fixture body (A) after screw the crystal shade (B). 6 Protective film A B CARE AND MAINTENANCE • Use a dry soft cloth to dust or wipe carefully. • Do not clean with abrasive materials, bleach, or solvents. TROUBLESHOOTING 1) The light does not come on at all: a) Ensure the power supply is turned on.