Installation Instructions

CARE AND MAINTENANCE

INSTALLATION (continued)

TROUBLESHOOTING

• Use a dry soft cloth to dust or wipe carefully.

• Do not clean with abrasive materials, bleach, or solvents.

1) The light does not come on at all:

a) Ensure the power supply is turned on.

b) Ensure the cord is plugged into an outlet.

c) Ensure the circuit breaker is set in the “ON” position.

2) Fuse blows or circuit trips when light is turned on.

a) Check for crossed wires, ensure wiring is correct.

If unable to ﬁ x any of the above issues, please consult a certiﬁ ed electrician.

6. Screw the crystal shades (B) onto

the each socket of the fixture body

(A) as shown in diagram.

Note:

Please remove the protective

film from the canopy back of fixture

body (A) after screw the crystal

shade (B).

Protective film

FIVE-YEAR LIMITED WARRANTY:

If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails

due to a defect in material and workmanship within five (5) years from the date of original purchase, simply bring this

lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT

LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar

PATRIOT LIGHTING product or part free of charge, within the stated warranty period, when returned by the original

purchaser with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light

bulbs; (2) does not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor,

injuries to persons/property or costs. This warranty does give you specific legal rights and you may have other rights,

which vary from state to state.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216

Monday - Friday 9:30 a.m. - 3:00 p.m. EST