Installation Instructions

8
ASSEMBLY INSTRUCTIONS
15. Attach a blade assembly to the underside of motor
assembly using previously removed motor screws.
Completely secure each blade assembly before moving to
the next.
16. Install the bulbs into the sockets of the light kit.
Important: Make sure to allow the bulbs to cool before
you replace them.
15
16
Slot
Blade Screw
Blade Washer
Blade Arm
Blade
Screw Cap
Light Kit
Note: View from underside of light kit.
Motor
Screw
Motor
Assembly
Motor Screw
Bulb
Light Kit
Light Kit
13. Insert the blade screws along with the blade washers
through the blade and into the blade arm and secure
with a screw cap. Repeat this step for the remaining
blades and blade arms.
14. Remove the six motor screws from the bottom of
the motor assembly using a Phillips screwdriver (not
included).
Note: A magnetic Phillips screwdriver (not included)
might make this step easier.
Note: The slot in the light kit allows access to the
preassembled motor screws.
14
13