Installation Instructions

ASSEMBLY INSTRUCTIONS

Bowl Housing

Single Pin

Connector

Adapter

Plate Screw

10. Remove one of the preassembled tter plate screws

from the tter plate and loosen the other two screws.

Then, connect the single-pin connectors from the tter

plate to the single-pin connectors from the light kit -- blue

to black and white to white.

9. Lift the slotted holes in the tter plate over the

loosened adapter plate screws. Turn the tter plate in a

clockwise direction and replace the previously removed

adapter plate screw. Tighten all adapter plate screws.

11. Align the slotted holes in the light kit with the

loosened screws in the tter plate. Turn light kit clockwise

and replace the previously removed tter plate screw.

Tighten all screws.

12. Lift the bowl housing into the light kit. Then, twist

the bowl housing tightly in a clockwise direction until it is

secure.

Fitter Plate Screw

Light Kit