Use And Care Manual

ManualsBrandsPatriot Lighting ManualsLandscape LightingSolar Integrated LED Dysart Bronze Landscape Light - 4 Pack

Read all instructions before assembly.

Failure to do so may result in faulty assembly and potential injury.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-877-615-1378

Monday – Friday 8:00 a.m. – 4:00 p.m. EST

Sku Number: 343-6166

Sku Number: 343-6167

4PK Dysart Landscape Light Set

Model Number: 24898 Stainless Steel

Model Number: 25071 Bronze

PACKAGE CONTENTS

Includes (1) AA Ni-Mh rechargeable battery per light.

LED: The lifetime for LEDs is estimated to be 100,000 hours.

It should never need to be replaced.

Ref. Part Name

A Solar Panel Unit

B Glass Lens

C Connection Tube

D Ground Stake

E Remote Control

Summary of content (4 pages)

PAGE 1
Sku Number: 343-6166 Sku Number: 343-6167 4PK Dysart Landscape Light Set Model Number: 24898 Stainless Steel Model Number: 25071 Bronze Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-877-615-1378 Monday – Friday 8:00 a.m. – 4:00 p.m. EST PACKAGE CONTENTS Includes (1) AA Ni-Mh rechargeable battery per light. LED: The lifetime for LEDs is estimated to be 100,000 hours. It should never need to be replaced. Ref.
PAGE 2
IMPORTANT INFORMATION FUNCTION: The built-in solar panels convert sunlight into electricity. The rechargeable battery stores the energy and converts the power into light for use during the night. The lighting hours of the solar light depends on the geographical location and weather condition. Stronger or longer exposure to sunlight enables the battery to store more energy and provide longer lighting hours.
PAGE 3
OPERATIONAL INSTRUCTIONS AND BATTERY REPLACEMENT OPERATION (Figures 5 & 6) Figure 5 • After assembling, take the light to direct sunshine that allows the rechargeable battery to reach its maximum capacity. Twist the Solar Panel Unit (Part A) a 1/4 turn in a counter clockwise direction until it separates from the Glass Lens (Part B). A • Prior to installation, make sure to remove the isolated tag from the battery chamber if this step was not completed during Assembly.
PAGE 4
BATTERY REPLACEMENT (REMOTE CONTROL) CHANGING THE BATTERY (Figure 9) Figure 9 • On the back of the Remote Control (Part E), push in the tab and pull out the battery chamber at the same time to open. • Replace the battery with a new 3V lithium CR2025 battery, ensuring the correct polarity is observed. E PUSH • Reinstall the battery chamber into the remote. OPEN TROUBLESHOOTING The light does not come on at night: • Make sure the isolated tag was removed from the battery chamber.