Sku Number: 356-3842 OUTDOOR SENSOR LIGHT Model Number: DH8099 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS B C A D E Part Description Quantity A B C Back Plate Finial Fixture 2 4 D E Frame Glass Shade 2 2 2 HARDWARE CONTENTS Note: Hardware not shown actual size.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
ASSEMBLY INSTRUCTIONS (continued) 3. Attach the decorated cup (C) and the rubber pad by inserting the threaded pipe, then tighten it with the finial (B) . 3 B Rubber Pad C Threaded pipe 6. Install a bulb(HH) (not included). Check relamping label at socket area or packaging for maximum allowed wattage. 6 Socket Bulb Type A Max.60W (not included) 4. Pull out the source wires from 4 7. Take glass shade (E) and 7 AA the outlet box.
ASSEMBLY INSTRUCTIONS (continued) “Time” Knob “Low Level” Knob “Sens” Knob Time Step 2: Turn the knobs to adjust time, low level brightness and sensitivity. And slide the slide switch to choose desired mode. (See Fig.2 and Detail A view). Low Level Sens Test Off Auto PC Step 1: Rotate the sensor lens counterclockwise to show up the adjustable knobs and slide switch. (See Fig.1) Slide Switch Step 3: Rotate the sensor lens clockwise to restore original position.(See Fig.
FUNCTION AND OPERATION (continued) Sensitivity of Motion Sensor The sensitivity of the motion sensor can be adjusted by using the “Sens” knob located on the right side of the panel at the back of sensor lens (See Fig.10). To increase sensitivity, turn the knob clockwise. To decrease sensitivity, turn the knob counterclockwise. The sensitivity may be adjusted from a minimum of 5 feet to a maximum of 40 feet. NOTE: 1.
CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING If the light does not work at all:First check the following aspects 1. Make sure the wall switch and circuit breaker are on. 2. Make sure the wiring is correct. 3. Make sure the bulb is not burned out，or loose use bleow chart for troubleshooting your security light SYMPTOM If the light will not come on DAY/NIGHT SOLUTION POSSIBLE CAUSE Day Test product functionality not in test mode.
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting fixture with the original sales receipt back to your nearest MENARDS retail store.
