Installation Instructions

Page 2
CAUTION:
MAKE SURE THAT NO WIRES ARE
PINCHED BETWEEN J-BOX MOUNTING
PLATE AND FIXTURE BODY.
Step 3
Step 1
Step 2
Step 4
WHITE
(NEUTRAL)
SUPPLY WIRE
WHITE
SUPPLY WIRE
FIXTURE WIRE
CONNECTOR
BLACK
BLACK (HOT)
FIXTURE WIRE
GREEN/YELLOW GREEN/YELLOW
GROUND WIRE
FROM SUPPLY
FIXTURE GROUND
hole diameter:
DL-3-6RR: Φ80mm (3 1/4 in)
DL-4-9RR:Φ110mm (4 3/8 in)
DL-6-15RR:Φ160mm (6 1/2 in)
Unscrew the two screws to remove the top panel.
Remove the knock-out.
Romex connector
(not included)
Black
Ground
White
Junction box
Screw
Hex nut
(not included)
(NOTE: Product may not look exactly as shown in figures.)
Made in China
CAUTION
WARNING: Risk of fire. Use only on 120 volt 60Hz circuits. Suitable for wet locations. Before installing your lighting fixture,
thoroughly review enclosed installation manual. If you do not have sufficient electrical wiring experience, please have your fixture
installed by a qualified licensed electrician. All electrical connections must be in accordance with Local and National Electrical
Code (NEC) Standards. Reliable operating temperature is 0°F–120°F. If flickering occurs in low level dimming, increase light
level.
Installation
INSTALLATION INSTRUCTIONS
Sku Number: 3491213, 3491214, 3491216
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at
1-800-267-4427 Monday - Friday 8:00 a.m. - 5:00 p.m. EST