Model: DOME13/4WY/BZ/PAT IMPORTANT SAFETY INSTRUCTIONS AND INSTALLATION GUIDE LED CEILING FIXTURE READ BEFORE INSTALLATION SAVE THESE INSTRUCTIONS
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation. . . . . . . . . . . . .
Pre-Assembly TOOLS REQUIRED Phillips Screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Installation 1 5 Turning Off the Power Turn the power OFF at the switch and fusebox or the circuit breaker. 2 Installing the Mounting Plate Secure the Mounting Plate (CC) to the outlet box by inserting the two Outlet Box Mounting Screws (FF) through the slots in the Mounting Plate (CC). Unpacking of Fixtures Carefully unpack and unwrap fixture (AA) and glass Lens (BB). Outlet Box CC 3 FF Removing Glass Lens Remove the Glass Lens (BB) if attached to the Fixture Housing (AA).
Installation 7 9 Install the Fixture Housing Install Glass Slide the Glass Lens (BB) into the Fixture Housing (AA) and secure by turning the Glass Lens (BB) clockwise. Tuck the wires into the outlet box and lift the Fixture Housing (AA) over the Fixture Mounting Screws (EE) through the fixture housing holes and secure it by hand tightening the Finials (GG) to the ends of the Fixture Mounting Screws (EE). AA NOTE: Hand tighten finials only.
Color Changing Instructions SELECTABLE COLOR TEMPERATURE PICK YOUR FAVORITE LIGHT COLOR BEFORE INSTALLING ADJUST YOUR LIGHT COLOR ANYTIME WITH A REGULAR WALL LIGHT SWITCH Set the slide switch on the middle of the fixture to SWITCH. You can lock in one color temperature or change among multiple color temperatures, it will memorize the last color temperature and reset automatically. Toggle your light switch ON and OFF within 0.5 - 3 seconds to cycle through the five different color temperatures.