Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor LightingChantelle Matte Black 3-Light Pendant

Sku number: 351-8440

3 LIGHT PENDANT

Model number: DS18578

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216

Monday - Friday 9:30 a.m. - 3:00 p.m. EST. For customer service support and the fastest

response, please email us at CustomerSupport@DSILighting.com.

PACKAGE CONTENTS

HARDWARE CONTENTS (Note: Hardware not shown actual size.)

Mounting strip

x 1

Threaded tube

(Pre-assembled to the

mounting strip (AA))

x 1

Lock washer

(Pre-assembled to the

threaded tube (DD))

x 1

Hex nut

(Pre-assembled to the

threaded tube (DD))

x 1

Chain

x 1

Canopy

x 1

Outlet box screw

x 2

Quick link

x 2

Screw collar loop

x 1

Green ground screw

(Pre-assembled to the

mounting strip (AA))

x 1

Wire connector

x 3

Ring

x 1

Threaded pipe

x 1

Rubber washer

x 2

Cap nut

(Pre-assembled to the fixture

body (E))

x 3

Metal washer

x 2

Thumbscrew

(Pre-assembled to the fixture

body (E))

x 3

Hex nut

x 1

Summary of content (4 pages)

PAGE 1
Sku number: 351-8440 3 LIGHT PENDANT Model number: DS18578 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216 Monday - Friday 9:30 a.m. - 3:00 p.m. EST. For customer service support and the fastest response, please email us at CustomerSupport@DSILighting.com. PACKAGE CONTENTS A B C D E F HARDWARE CONTENTS (Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
INSTALLATION (continued) 5 5. Open one quick link (KK) on the end chain (JJ), and remove the quick link and keep the quick link(KK) for later use. To adjust the chain (JJ) to the desired length, spread the end link of the chain (JJ) and remove unnecessary links. Two people are suggested for this step. One to hold the chain, and one to separate the links. Use a pair of pliers and a screwdriver as shown above. Wrap a soft cloth around pliers to protect the finish of the chain.
PAGE 4
CARE AND MAINTENANCE • Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. • To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. TROUBLESHOOTING 1) The light does not come on at all: a. Make sure the wall switch and circuit breaker are on. b. Make sure the wiring is correct.