Installation Instructions

ASSEMBLY INSTRUCTIONS (continued)

FUNCTION AND OPERATION (continued)

Page 6 of 8

201029

Spare Parts List:

Assembly Kit

6298MM (1 SET) for 356-9430

6325MM (1 SET) for 356-9431

Fig. 8

Fig. 9

Fig.10

Motion

Least sensitive

Motion

Most sensitive

Sensor

10'

8.0'

12.0'

70'

Where you install your fixture is important:

Be sure the light is mounted straight on the wall

or eave; otherwise, the detection distance may

be limited.

180˚

Customization Options:

Shut-off Delay

● The shut-off delay is the length of time the light will stay at brightness after motion is detected.

● You can set the shut-off delay by rotating the Time knob arrow so it points to the desired time setting

(30s/1min/3min) (See Fig.5).

Notes:

1. The sensitivity of the motion sensor will increase as the environmental temperature gets cooler. For best

performance, gently clean the lens with a soft cloth every 1 or 2 months to ensure maximum sensitivity.

2. For best performance, install fixture at least 8 feet above the ground. At such a height, the fixture will provide a

detection distance of up to 70 feet at 77 degrees Fahrenheit. (See Fig.8)

3. The sensor detects movement across a detection range of 180 degrees. (See Fig.9)

4. The sensor will be more sensitive to motion across its detection path than motion directly towards it. (See Fig.10)

5. To reduce possible nuisances, do not mount the fixture near a heat source like an air conditioner, vent or furnace

exhaust, or in a direction facing any reflective object or other nearby light source.

The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.

Wire Connector

Gasket

AA CCBB

Decorative Cover

Mounting Screw

Mounting Strap Unit

Ring and Screw