Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor Lighting1 x 2 2550 Lumens Integrated LED White Flat Panel Light

Question/Comment/Missing Part?

Customer Service 1-800-205-6201

WARNI NG:

TO AVOID RISK OF ELECTRICAL SHOCK

TURN OFF OR DISCONNECT FROM POWER

WHILE INSTALLING OR SERVICING UNIT

Installation Instructions: 348-0126 (M-FP-12W) | 1 ft x 2 ft 2500 Lumen LED Flat Panel Light

- When using product, basic precautions should always be followed.

- Read and follow these instructions and heed all warnings.

- Carefully read and understand the information given in this manual

before beginning installation. Failure to do so could lead to electric

shock, ﬁre, or other injuries which could be hazardous or even fatal.

- Save these instructions and warnings.

- Use carabiner hook to hang product, do not use the electrical cord.

- Do not install on radiant heated ceiling.

- This item is designed for dry use and is not water proof.

- Do not place this item in a humid or dusty environment.

- Do not use in areas with temperature higher than 104° Fahrenheit.

- Do not use in areas near a gas source.

WARNING

CAUTION

PRE-INSTALLATION:

1. Before assembly, compare package contents

with parts list to make sure all parts are present.

2. Shut off power at circuit breaker before removing existing ﬁxture. If you are unfamiliar with electrical

installations, we recommend you have a qualiﬁed electrition complete your intallation.

3. Select suitable location that can support the weight of the ﬁxture. Determine mounting method (Page 2).

4. Mark two spots on the ceiling 42” apart for the mounting hardware (not included).

Measuring Tape

TOOLS REQUIRED:

Power Drill

HARDWARE:

Part Description Quantity

AA Chain 2

BB “S” Hook 2

Question/Comment/Missing Part?

Customer Service 1-800-205-6201

WARNI NG:

TO AVOID RISK OF ELECTRICAL SHOCK

TURN OFF OR DISCONNECT FROM POWER

WHILE INSTALLING OR SERVICING UNIT

Assembly & Installation Instructions: 370-5439 | 10ft LED String Light

PRE-INSTALL

HARDWARE

Tools required

1. Before assembly compare package contents with list to make sure

all parts are present.

2. Shut off power at circuit breaker before removing existing xture. If

you are unfamiliar with electrical installations, we recommend you

have a qualied electrician complete your installation.

3. Select suitable location that can support the weight of the xture.

Determine mounting method (Page 2.).

4. Using the Color Temperature Guide Card select whichever color

temperature best ts your environment

Phillips Screw Driver

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS. If you have any non-electrical

questions about this fixture, please call our Customer Service Team at

1-877-527-0313 or visit www.homedepot.com. Please reference your

SKU (204-960) or UPC (046335960640).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not

included):

ELECTRICAL TAPE

SAFETY

GOOGLES

WIRE STRIPPERSWIRE CUTTERS

#2 PHILIPS

SCREWDRIVER

FLATHEAD

SCREWDRIVER

Power Drill

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Mounting Plate (8.07 in. x 9.8 in. x 0.47 in.) 1

BB 3/16 in. Toggle Bolts 4

CC Wire Nuts 3

DD Screws #8-32 x 1 in. 2

Phillips

screwdriver

AA BB CC DD

Power Drill 1/2 in. Drill Bit

DISTANCE

3 FT.

5 FT.

8 FT.

15 FT.

CENTER BEAM (FOOT CANDLES)

LIGHTING DISTRIBUTION

5.5

1.6

BEAM ANGLE = 112º

BEAM DIAMETER

8.9 FT.

15 FT.

24 FT.

44 FT.

Part Description Qty

AA Mounting Plate 1

BB Toggle Bolts 4

CC Wire Nuts 3

Part Description Qty

DD Mounting Screws 2

EE Drywall Anchor 4

FF Drywall Screws 4

1 ea Fixture Pan (#1)

2 ea Fixture Mounting

Screws (#8)

3 ea Wire Nuts (#10)

1 ea Fixture Pan (#1)

2 ea Fixture Mounting

Screws (#8)

3 ea Wire Nuts (#10)

1 ea Fixture Pan (#1)

2 ea Fixture Mounting

Screws (#8)

3 ea Wire Nuts (#10)

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Mounting Plate (8.07 in. x 9.8 in. x 0.47 in.) 1

BB 3/16 in. Toggle Bolts 4

CC Wire Nuts 3

DD Screws #8-32 x 1 in. 2

Phillips

screwdriver

AA BB CC DD

Power Drill 1/2 in. Drill Bit

DISTANCE

3 FT.

5 FT.

8 FT.

15 FT.

CENTER BEAM (FOOT CANDLES)

LIGHTING DISTRIBUTION

5.5

1.6

BEAM ANGLE = 112º

BEAM DIAMETER

8.9 FT.

15 FT.

24 FT.

44 FT.

EE FF

5/16” Drill Bit

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Mounting Plate (8.07 in. x 9.8 in. x 0.47 in.) 1

BB 3/16 in. Toggle Bolts 4

CC Wire Nuts 3

DD Screws #8-32 x 1 in. 2

Phillips

screwdriver

AA BB CC DD

Power Drill 1/2 in. Drill Bit

DISTANCE

3 FT.

5 FT.

8 FT.

15 FT.

CENTER BEAM (FOOT CANDLES)

LIGHTING DISTRIBUTION

5.5

1.6

BEAM ANGLE = 112º

BEAM DIAMETER

8.9 FT.

15 FT.

24 FT.

44 FT.

1/2” Drill Bit

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

AA Mounting Plate (8.07 in. x 9.8 in. x 0.47 in.) 1

BB 3/16 in. Toggle Bolts 4

CC Wire Nuts 3

DD Screws #8-32 x 1 in. 2

Phillips

screwdriver

AA BB CC DD

Power Drill 1/2 in. Drill Bit

DISTANCE

3 FT.

5 FT.

8 FT.

15 FT.

CENTER BEAM (FOOT CANDLES)

LIGHTING DISTRIBUTION

5.5

1.6

BEAM ANGLE = 112º

BEAM DIAMETER

8.9 FT.

15 FT.

24 FT.

44 FT.

Summary of content (4 pages)

PAGE 1
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK TURN OFF OR DISCONNECT FROM POWER WHILE INSTALLING OR SERVICING UNIT CAUTION WARNING Installation Instructions: 348-0126 (M-FP-12W) |370-5439 1 ft x 2 ft 2500| Lumen Panel Light Assembly & Installation Instructions: 10ft LED LEDFlat String Light - When using product, basic precautions should always be followed. - Read and follow these instructions and heed all warnings.
PAGE 2
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK TURN OFF OR DISCONNECT FROM POWER WHILE INSTALLING OR SERVICING UNIT Installation Instructions: 348-0126 (M-FP-12W) | 1 ft x 2 ft 2500 Lumen LED Flat Panel Light INSTALLATION INSTRUCTIONS 1. Safety Concern! Always turn off the power at the breaker when installing light fixtures. 2. Locate Hot, Neutral and Ground wires at installation location. 3. Attach the mounting plate to the junction box using provided screws.
PAGE 3
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK TURN OFF OR DISCONNECT FROM POWER WHILE INSTALLING OR SERVICING UNIT Installation Instructions: 348-0126 (M-FP-12W) | 1 ft x 2 ft 2500 Lumen LED Flat Panel Light CC 5. 2. CC 3. 6. 4. Unlocked Locked TROUBLE SHOOTING Problem Possible Cause Solution The fixture does not light The power is off Check that the power supply is ON. There is a bad wire connection.
PAGE 4
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK TURN OFF OR DISCONNECT FROM POWER WHILE INSTALLING OR SERVICING UNIT Installation Instructions: 348-0126 (M-FP-12W) |370-5439 1 ft x 2 ft 2500| Lumen Panel Light Assembly & Installation Instructions: 10ft LED LEDFlat String Light CARE AND CLEANING - Your fixture is made from quality materials that will last extended period of time. You may want to periodically clean the surface of the fixture. - Use a mild, non-abrasive glass cleaner.