Installation Instructions

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0286

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Mounting Screw (B)

Wire Connector (F)

Ball Nut (G)

Cross Bar (A)

Green Grounding

Screw (C)

Headless

Screw (D)

Hardware Package (included):

Lock Nut (E)

180608

Outlet Box

Mounting Screw (B)

White (Neutral) Wire

Cross Bar (A)

Green Grounding Screw(C)

Wire Connector (F)

Headless Screw (D)

Lock Nut (E)

Black (Hot) Wire

Grounding Wire

Ball Nut (G)

Metal Shade

Socket Ring

Fixture

Bulb Type A Max.100W

(Not included)

PAGE 1
W0286 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Thread two headless screws through the cross bar, then secure them with four lock nuts (two on each side of the cross bar). Adjust the length of the headless screws if necessary. Note: Make sure that headless screws are lined up horizontally, in order to ensure that the fixture will be level. 2. Attach the cross bar to the outlet box by using two mounting screws. 3. Pull out the source wires from the outlet box.