Installation Instructions

Outlet Box
Wire Nut
Mounting Screw
Mounting Strap
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
Fixture Wire
Hex Nut
Washer
Nipple
070309
1. Attach the nipple to the mounting strap, then secure it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two mounting screws.
3. Pull out the outlet wires and house grounding wire from the outlet box. Make wire
connections with wire nuts:
---The black wire from the light to the black wire from the power source.
---The white wire from the light to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding
screw. Then connect it to the house grounding wire with a wire nut.
Carefully tuck the wires back into the outlet box.
4. Attach the back plate to the mounting strap by inserting the nipple, then secure it
with a end cap.
5. Attach the glass shades to the glass holders, then secure them with the socket rings.
6. Install bulbs (not included). See relamping label at socket area or packaging for
maximum allowed wattage.
7. Turn on the power at the main fuse or circuit breaker box.
End Cap
Back Plate
Glass Holder
Glass Shade
Socket Ring
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
BL-VLD002 / VLD003 / VLD004