Installation Instructions

ManualsBrandsPatriot Lighting ManualsIndoor LightingYosemite Burnished Bronze 3 Light Vanity Light

170731

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTION.

VL55503

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Glass Shade

Glass Holder

House Grounding Wire

Wire Nut (C)

Outlet Box

Back Plate

Bolt Nut (D)

Socket Ring

Mounting Plate

Screw

Mounting Screw (A)

Anchor (E)

Drywall Screw (F)

Set Hole

Green Grounding Screw (B)

Fixture Wire

Fixture Grounding wire

Bulb Type A Max.100W

(not included)

Hardware Package (included):

Mounting Screw (A)

Wire Nut (C)

Bolt Nut (D)

Anchor (E)

Drywall Screw (F)

Green Grounding

Screw (B)

Back Plate

Set Screw

"L" Clip

Back Plate

V-B3

"L" Clip

Set Screw

Fig.1

Fig.2

V-B1

V-C

V-D

V-C

V-B2

V-B4

V-C

V-B3

V-D

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS VL55503 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THIS INSTRUCTION.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Unscrew two bolt nuts, and remove the mounting plate from the back plate. 2. Fix the mounting plate to the wall. a) For wooden material: Attach the mounting plate to the outlet box by using two mounting screws, and then secure the drywall screws through the set holes to the wall. b) For cement material: Place the mounting plate to the outlet box and mark the target on the wall from the set hole for drilling two holes.