Assembly Instructions

ManualsBrandsPatriot Lighting ManualsIndoor LightingAshtyn Matte Black & Charcoal Patina 1-Light Mini Pendant

210605

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

SKU Number: 351-8783

1-LIGHT PENDANT

Model Number: MH316

PACKAGE CONTENTS

HARDWARE CONTENTS

Mounting Screw

Wire Connector

AA BB

Bolt Nut

DDCC

Loop Lock

Mounting Strap Unit

Vintage Bulb 60W

Note: Hardware not shown actual size.

Summary of content (4 pages)

PAGE 1
SKU Number: 351-8783 1-LIGHT PENDANT Model Number: MH316 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A B HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 3. Thread the fixture wires 3 through the canopy unit(A), connect the fixture loop and canopy unit(A) with the loop lock(EE) 4. Pull out the source wires 4 from the outlet box, make wire connections using AA Green Fixture Mounting wire connectors(CC) as Ground Screw Screw follows: ---Connect the smoothCC coated(marked) wire from the fixture to the black (hot) wire from the power source.
PAGE 4
CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not work: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct. 2) Fuse blows or circuit trips when light is turned on. Check for crossed wires, ensure wiring is correct. If unable to fix any of the above issues, please consult a certified electrician.