Assembly Instructions

Page 3 of 4
210605
ASSEMBLY INSTRUCTIONS (continued)
The following parts are available for reorder if damaged or missing. Call our toll free at 1-800-887-6326.
Spare Parts List:
Assembly Kit
6402MH (1 SET)
A
AA
DD
5
3. Thread the fixture wires
through the canopy unit(A),
connect the fixture loop and
canopy unit(A) with the loop
lock(EE)
5. Attach the canopy unit(A) to
the mounting strap unit(AA)
by aligning and inserting the
two fixture mounting screws
from the mounting strap unit
(AA) into the open holes on
the canopy unit(A), then
secure the canopy unit(A)
Fixture
Mounting Screw
with two bolt nuts(DD).
6
B
EE
A
3
Turn on the power at the
fuse or circuit box.
Fixture Loop
Fixture Mounting
Screw
6. Install 1x60W medium
base vintage bulb(FF).
(included)
See relamping label at
socket area or packaging
for maximum allowed
wattage.
AA
4
FF
Mounting Screw
X2
Wire Connector
X3
AA BB
Bolt Nut
X2
DD
CC
Loop Lock
X1
EE
Mounting Strap Unit
X1
Vintage Bulb 60W
8072EB
FF
CC
Green
Ground Screw
4. Pull out the source wires
from the outlet box, make
wire connections using
wire connectors(CC) as
follows:
---Connect the smooth-
coated(marked) wire from
the fixture to the black
(hot) wire from the power
source.
---Connect the ribbed-
coated(unmarked) wire
from the fixture to the
white(neutral) wire from
the power source.
---Attach the fixture ground wire(bare wire) to the
mounting strap unit(AA) with the green ground
screw, then connect the fixture ground wire to the
house ground wire with a wire connector(CC).
Carefully put all of the wires back into the outlet box.
9.5" Rod
3295RD