Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
1. Attach the nipple-1 to the mounting strap, and then
secure with a washer and a hex nut.
2. Attach the mounting strap to the ceiling box by using
two mounting screws.
3. Secure the antler to the nipple-3 tightly.
4. Secure the loop to the nipple-2 in the top of the antler.
5. Choose the certain length of the chain you need, and
then weave the fixture wire and the grounding wire
through the chain links. Then connect one end link of
the chain with the loop by using the loop lock.
6. Thread the fixture wire and grounding wire through
the collar, top loop ,canopy, nipple-1 and mounting
strap in order.
7. Secure the top loop to the nipple-1, and connect the link
on the other end of the chain with the top loop by using
the loop lock.
8. Make wire connections with wire nuts:
---The smooth wire (marked) from fixture to the black
wire from power source.
---The ridged wire (unmarked) from fixture to the white
wire from power source.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to the
house grounding wire with the wire nut.
Carefully tuck wires back into the ceiling box.
9. Attach the canopy to the mounting strap by inserting
the top loop, and secure with the collar.
10. Install bulbs. (Please do not exceed the maximum
capacity that is recommended on the package.)
11. Attach the glass shade upwards to the socket set by
inserting the nipple-4, and then secure with rubber pad
metal pad and hex nut.
12. Attach the cap upward to the glass shade, and then
secure with the finial.
13. Turn on the power at fuse or circuit box.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
Installation Steps
PD33088
Mounting Screw
Nipple-1
Canopy
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Ceiling Box
House Grounding Wire
050628
Fixture Wire
Chain
Fixture Grounding Wire
Collar
Top Loop
Loop Lock
Loop Lock
Loop
Nipple-2
Antler
Socket Set
Nipple-4
Glass Shade
Rubber Pad
Metal Pad
Hex Nut
Finial
Cap
Nipple-3