Installation Instructions

INSTALLATION:
4. Connect the ground wires
(bare copper or green) from
your fixture to the ground
wire (bare copper or green)
or ground screw in the
electrical outlet box. Connect
black wire from fixture to black
wire in outlet box and connect
the white wire from fixture to
white wire in outlet box.
5. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
outlet box making sure no bare
wire (on the black and white) is
visible at the wire nuts.
Position
fixture over studs or nipple on
mounting bracket assembly.
Secure fixture in place with star
washers and cap nuts.
6. Remove spinner nut from
socket. Position glass on lamp
and secure with spinner nut.
7. Install proper bulb type
and wattage (not included).
Star
Washer
Cap
Nut
Fixture
Stud
1. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”.
2. Mount the mounting
bracket to outlet box using
outlet box screws (not included).
Make sure the studs or nipple
on the mounting bracket are
facing out from the outlet box.
3. Screw lower downrod into
the fixture. Install swivel to the
rod, ensuring that the sleeve is
at the swivel.
Note: Remove fixture pan, plate
and rods if required (If you wish
to change the downrod length)
Install the length of rod that is
required by threading wire
through the rod and securing it
to the fixture.
Fixture
Sleeve
Rod
Swivel
Bulb
Bulb
Outlet Box Screws
(not included)
Studs
“B”
Outlet
Box
Mounting
Bracket
Glass
Fixture
Socket
RIPL222A01-M
08/10
352-6250
TOOLS AND MATERIALS REQUIRED:
SAFETY PRECAUTIONS:
Phillips
Screwdriver
Wire Cutters
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
Pliers Wrench
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
PENDANT
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T. or email to: [e-mail]
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
Spinner
Nut
White
Black
House supply
Ground wire
Fixture
Ground wire