Installation Instructions

Page 3 of 4
190723
ASSEMBLY INSTRUCTIONS (continue)
3
B. For 4” Housing mounting.
2. Secure the shrapnel stents (DD)
with screws (EE).
3. Insert the black and white
wires of the fixture into
the E26 conversion
socket (FF). Then push
the fixture into the housing
until the shrapnel stents
button the housing closely
and the fixture is flush with
the ceiling suface.
Turn off the power at fuse or circuit box.
Turn on the power at fuse or circuit box.
1. Attach the shrapnel stents (DD)
to fixture.
DD
C. For 5” / 6” Housing Mounting
Turn off the power at fuse or circuit box.
Turn on the power at fuse or circuit box.
1. Lock the torsional spring bracket to the
outer ring as instructed and install the
torsional spring.
2. Insert the black and white wires of the
fixture into the E26 conversion socket (FF),
then install the fixture to the housing.
3. Squeeze the torsional springs together as
shown and install into torsional spring
brackets on the housing.
4. Pull and secure the fixture.
Spare Parts List:
The following parts are available for re-order if damaged or missing. Call our toll free at 1-800-887-6326.
Assembly Kit
Outlet Box
Assembly Kit
4” Housing
Assembly Kit
5” / 6” Housing
Assembly Kit
5951MM (1SET)
Mounting Plate
X1
AA
Wire Connector
X3
CC
Mounting Screw
X2
BB
DD
Conversion Socket
X1
FF
Screws St3.0x8
X2
EE
Shrapnel Stents
X1
GG
Torsional Spring
X2
HH
Torsional Spring Bracket
X2
Screws St4.0x8
X2
II
FF
Conversion Socket
X1
Torsional Spring
Torsional Spring Bracket
Outer Ring
GG
EE
DD
FF
Housing
3
1
2