Installation Instructions

Page 4 of 5
ASSEMBLY INSTRUCTIONS FOR SPOT LIGHT
CAUTION:
To reduce the risk of fire, electrical shock, or personal injury, do not touch or remove the spot light on the rail when
the light is on. Instead, turn off the electrical power. Unscrew the caps and to remove the spot light from the rail. Then
reinstall them back onto the desired positions of the rail.
1
2
C
C
C
GG
A
A
3
4
1. Choose one spot light,
unscrews the caps from the
rail adapter(C) of spot light,
then turn the movable
part of rail adapter(C) up.
3. Follow steps 1~2 to install the
other adapters(C) of spot light
onto the rail(A).
Brass Clip
Ground Strip
Brass Strip
Ground Clip
Cap
Spot Light
Head
Cap
Movable part
of Rail Adapter
2. Attach the rail adapter(C) of
the spot light onto the rail(A).
Close back the movable
part of rail adapter(C) over
the rail(A), then restore the
caps back to the rail
adapter(C). Make certain that
the brass clips of the adapter
are connected properly with
the brass strips.
CAUTION: To ensure the
fixture works correctly, make sure the connection
between the adapter and the rail is correct. The
ground strip on the rail is always facing to the
ceiling.
4. Insert GU10 LED Bulbs(GG)
Max.7W (included) into the
sockets of the spot light head.
Note: Turn off the power
and allow the fixture to cool
down completely before
relamping the lamp.
Spot Light
Head
5
5. Adjust the spot light head to a
desired position by rotating the
swivel.
Turn on the power at fuse or
circuit box.
Spot Light
Head
Swivel
GU10 LED Bulb
Max.7W
(included)