Installation Instructions

(C)
TRACK INSTALLATION
TRACK HEAD INSTALLTION
* For wooden ceiling:(See illustration B)
1. Position the track under the outlet box .
2. Mark the locations of the 2 track mounting holes at each
end of the track.
3. Drill 2 holes at the marked places.
4. Secure the track screws through the holes of the track
and toggle bolts. Then attach the toggle bolts into the
holes of the wooden ceiling until the toggle bolts were
secured.
* For cement ceiling:(See illustration C)
1. Position the track under the outlet box .
2. Mark the locations of the 2 track mounting holes at each
end of the track.
3. Drill 2 holes at the marked places.
4. Insert the anchors through the holes of the ceiling, then
attach the track screws through the holes of the track,
and secure the track screws to the anchors.
1. Push adapter of track head up into track opening and pull down the spring clip, then turn it 90
degrees until it snaps into place.
Note: For proper connection, double polarity line on adaptor of track head should be positioned on
the same side as the double contact points along the linear length of the track. Examine interior of
track contact points prior to installing.
2. Adjust the spotlight head to a desired position using the swivel.
(B)
Toggle Bolt
Wooden Ceiling
Track
Track Screw
Cement Ceiling
Anchor
Track
Track Screw
130912
Set Screw
(A)
Rotate 90
(A1)
Mounting Bracket